Shopping Cart

Your cart is empty.

Your cart is empty.

PCIe SATA Expansion Card, 4-Ports 6.0 Gb/s SATA Expansion Card, Supports PCI Express X1 X4 X8 X16 Slot for Windows10/7/8/XP/Vista/Linux with 4 Data Cables and Power Splitter

4.4 (3) Write Review
Free shipping on orders over $29.99

$24.99

$ 11 .99 $11.99

In Stock

About this item

  • Stable and Efficient Performance: Marvell 88SE9215 chipset with heat sink alloy sheet, this pcie sata expansion card also comes with a heat sink alloy cover to prevent damage caused by overheating during operation.
  • PCIe Interface and Speed: Supports PCIe 3.0, 2.0, and 1.0 slots. Maximum transfer speeds: 500-550 MB/s (PCIe 3.0), 380-450 MB/s (PCIe 2.0), and 200-300 MB/s (PCIe 1.0). Hot-swap support allows for flexible usage. (Please check your motherboard specifications for PCIe version compatibility).
  • Four SATA 3.0 Ports: Equipped with four SATA 3.0 (6Gbps) ports, enabling connections with up to four SATA HDDs or SSDs for effortless storage expansion. Also compatible with SATA 2.0 and SATA 1.0. Supports software-based RAID (Windows RAID, Linux MD RAID) for array management.
  • Broad Compatibility: Supports Windows XP/2003/7/8/10 (32/64 bit)/MAC/Linux and other operating systems. PCIE SATA card is compatible with PCIE X1, X4, X8, X16 slots, making it suitable for desktops and workstation.
  • Complete Installation Kit: Includes 15PIN 1 to 4 SATA Power Splitter, 4 SATA cables, standard and low-position brackets to ensure easy installation in different PC cases.


Product Description

PCle To 4 Port 3.0 SATA Card

PCIe to sata expanxion card, sata card

SATA 3.0/2.0/1.0 transfer speed, (speed is limited by the connected device)

pcie to sata adapter , sata pcie card , sata pcie expansion card

Multi-system compatibility (very few system environments require drivers)

sata expansion card , pci sata expansion card , pcie to sata

Product Basic Information

Chipset Marvell 88SE9215
Supported Systems Windows XP /2003 / 7 / 8 / 10; MAC; NAS; Linux
Supported PCIe slots PCIe x1 x4 x8 x16
Bandwidth 6Gbps & 3Gbps & 1Gbps

brandon
Reviewed in the United States on May 25, 2025
Worked right out of the box and all 4 drives showed up
Quang N.
Reviewed in the United States on April 28, 2025
The SMBLCE PCI-E X1 to SATA 3.0 Controller Card is a solid and affordable choice for adding extra storage to your PC. It installs easily into any PCIe x1, x4, x8, or x16 slot and works well with Windows and Linux systems. I appreciated that it came with both the data and power cables needed for setup, which saved me a trip to the store. The speeds are decent for normal use like backups or adding extra hard drives, though heavy users might notice slower transfers when using multiple drives at once, due to the x1 lane bandwidth limits. It’s not built for RAID, but for straightforward drive expansion, it’s a great value. If you just need more SATA ports without the fuss, this little card gets the job done well.
pmoy
Reviewed in the United States on April 27, 2025
I’ve been running UNRAID with 5 HDDs on an N100 motherboard for the last 8 months. The motherboard has 6 SATA ports, 2 M.2 ports, and a single PCIe x 1 slot. I wanted to add 3 SATA drives to my build. Since I’m already using the M.2 ports for NVMe SSDs, my only alternative is a PCIe x1 card like this one. Installation was seamless. I installed the card and plugged in the drives. UNRAID recognized the card and drives automatically, and everything worked without issues.