Your cart is empty.
Your cart is empty. Specification:
Bus Mode: PCI-E x1
Compatible Slots: PCI-E x1 / x4 / x8 / x16
USB Interface: 2 USB3.0 ports
Rate: USB3.0, 5Gb / s
Support Operating System: 32/64, 7 32/64, Windows8, Windows8.1, Windows10
Package Weight: 80g
Quantity: 1pc
Package included:
1 x PCI-E To USB3.0 Expansion
H. Martin
Reviewed in the United States on March 13, 2025
DOA
J
Reviewed in the United States on April 10, 2025
Windows 7 Pro x64 PCEasy InstallI attached 4 Pin power but Not the 19 Pin Front Power.The card was recognized by the motherboard and the VIA drivers were installed. A reboot locked them into the BIOS.Both USB ports work flawlessly. The speed is good at 100Mps on an old system.FYI - These are my DriversGigabyteGA-78LMT-USB3 (rev. 6.0)SupportWindows 7 64bit+ USB 3.0VIA USB 3.0 Driver v4.20 116.85MB**NOT - v4.90a** 11.61MB
cameron mitchell
Reviewed in Canada on June 16, 2024
My setup has a front panel with more than 2 USB ports (2 x USB 3.0 & 2 x USB 2.0). I didn't realize the 19 pin usb facilitates more than just the 2 USB 3.0 ports. This messes up the card so now only 1 of those ports is working. This is my own fault but I thought it best to give people a heads up.. if possibly more than 2 USB ports run off your 19 pin connector then it might be more prudent to buy a card that only has the 19 pin connector & nothing else so that it can provide the front panel what it needs.
Customer
Reviewed in the United States on April 25, 2024
Make sure to plug the 4 pin molex power plug in.
MICHAEL CHARO
Reviewed in the United States on April 13, 2024
Installed this on an old computer and it works perfectly..No problems with delivery or product 👍.
Edgar Ulises Moreno Chalico
Reviewed in Mexico on August 6, 2023
Fue muy fácil instalarlo, sin configurar nada lo detectó Windows y en Linux también
happyinco
Reviewed in the United States on June 10, 2023
Works as advertised, added USB 3.0 to a PC which only had USB 2.0.
garthmicro
Reviewed in Canada on December 4, 2023
This card allowed me to add 2 USB ports on the back of the computer that I was building and allowed me to add a USB 3.0 header which I needed for a USB front panel that I was adding. It was easy to add. Windows 10 installed the driver automatically. It worked perfectly. The directions on the included paper were in Chinese which I don't read. I did not need the directions and that was a good thing!!!
Toni H.
Reviewed in the United States on April 1, 2023
80 MB/s on a 12 year old Dell!
Marco Gonzalez
Reviewed in Mexico on November 5, 2022
Muy bueno y muy fácil de usar no me pidió drivers ni nada solo lo instale y lo comencé a usar ya lo mejor es que adicional de los 2 puertos usb que tiene pude conectar el cable de usb frontal de mi gabinete que me dio otros 2 usb 3.0 por el costo una muy buena compra
Chris Kukowski
Reviewed in the United States on July 30, 2021
Super simple installation (duh). It works, Windows 10 installed a driver automatically, and now i can use my front panel USB 3.0 connector without buying a new mobo :D
The Cains
Reviewed in the United States on March 27, 2021
I have a custom computer that I built from the ground up in 2009. It has an ASUS Motherboard with an Intel Quad/4 CPU plus I added an ATI Radian Video board. I am running Windows 10 Home 64 bit on it and it serves me well.I recently purchased a WD 12TB USB 3.0 external HDD to use as back up storage for all my data on my home network. The motherboard only had 2.0 USB ports on it and the file transfer rate was very slow.Rather than spend several hundred dollars to buy a new computer or build a new one, I decided to try purchasing and installing an USB 3.0 PCIe x1 interface for my PC.This USB 3.0 Interface board was easy to install onto my motherboard, which had a spare PCIe X1 expansion slot on it. Plus I had a spare power supply plug to connect to the USB 3.0 board so that it could power any device that needed extra power.I connected the WD USB HDD to the new USB 3.0 port and powered on my PC. At 1st, Windows did not see the new USB 3.0 connection and in Device Manager the interface card showed missing driver errors. But after running Windows Update from the main Settings Windows screen, the new interface drivers were installed and Device Manager recognized the new USB 3.0 device.My WD external HDD is working as expected and I am happy with this purchase.Now I need to see where I can get USB 3.0 front panel ports to install on the front panel of my full size Computer Case.
Dave
Reviewed in Canada on September 15, 2020
The adapter card arrived quickly, installed easily (requires a Molex power cable connection), and drivers installed "silently" and flawlessly in the background. No CD is required. The onboard drivers in the chip set work flawlessly with Win 10. I have my webcam and scanner connected to the card and they both work well. Assuming that it is reliable and durable in the long term, I am pleased with the purchase.
Recommended Products
