Your cart is empty.
Your cart is empty.Product Description
For hard to reach fasteners. Heat treated alloy steel. Drop forged for strength. Polished chrome plated finish. Bonus storage rail included. Sizes: 3/8 to 7/8".
From the Manufacturer
Performance Tool is an importer with nearly 40 years of experience supplying high quality products with great value. You can be confident that the Performance Tool products you purchase will perform to the highest standards. This is the ultimate wrench set for the hard to reach areas. These crowfeet wrenches have a five sided design to prevent slippage and help you get the job done faster. Made with heat treated alloy steel and drop forged for strength, these have a polished, chrome plated finish. They come with a bonus storage rail and have a lifetime warranty.
Tom
Reviewed in the United States on June 12, 2023
The crows foot would not stay attached to my extension. I kept having to fish it out with a magnet. They got the job done, but if I could go back in time I would spend a little more for better ones
omar porto recoba
Reviewed in Mexico on May 7, 2023
Exelente lo recomiendo
María de los Ángeles Vázquez
Reviewed in Mexico on April 26, 2023
Muy buena herramienta excelente calidad felicdades
Cameron armstrong
Reviewed in the United States on March 17, 2022
Good and they don’t mess up a lot since they’re flare but ends, missing some essentials but I can get those later
sandra
Reviewed in the United States on December 25, 2021
Got these for some work where a regular combination wrench wouldn't fit due to clearance issues. Was happily surprised by their heft and finish. They worked great for my task, and appear to be well made and I expect to have them in my toolbox for a long time - even came with a quality holder - nice. Very happy with them.
HDrider269
Reviewed in the United States on October 5, 2014
Great Finish and Quality in a very well priced Line wrench style Crow foot wrench set, This is definitely a Bargain!!
Bruce@W
Reviewed in the United States on February 26, 2013
for the money, I wasn't sure what to expect, but I was pleasantly surprised. They stay on the drive extension, and are of very good quality. much heavier than I anticipated.
L. Heston
Reviewed in the United States on March 15, 2012
These appear to be very high quality steel forged wrenches. I was impressed with the mirror quality chrome with consistent coverage on all sides and edges. I have used a few of my set and had no issues with their performance, either on the nut or attachment to my older extentions.
Byron Adams
Reviewed in the United States on November 24, 2012
the product was lovely but the b ox it was shipped in was huge , had to pay extra for it .
Stephen Tashiro
Reviewed in the United States on November 20, 2011
The Wilmar Performance Tool W351 SAE Crowfoot Wrench Set contains 8 line wrench heads that fit a 3/8 inch extension for a socket wrench. The heads are sizes 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8 inches. (So you don't get a size 13/16 ) They come on a typical metal strap socket holder.The opening where the extension is inserted into the wrench head does not have notch to capture the small ball that is near the end of a typical extension. So the the heads may pull off the extension too easily in some situations.I call this type of wrench head a "line wrench" since the opening has the shape of a hexagon. This is unlike the shape in an "open end" wrench, which is rectangular. A line wrench head cannot be put on a nut directly from the side. It must be positioned below or above the nut and moved over it. It is useful in situations where you want to avoiding rounding off a nut. This is the case for nuts on automotive fuel and brake lines where the line has a flared end and replacing a rounded nut would not be a simple job.For some situations in plumbing work, these wrench heads may not work since water lines are nearly the same diameter as some of the nuts on them. On a 1/2 inch braided water supply line, I find that I can slip the 5/8 inch head on the line to deal with a 5/8 inch nut, but I can't slip the 9/16 inch head over the line or the metal collar below a 9/16 nut. (The small projections on the tips of these heads keep them from slipping over lines that have that same size diameter.)I rate this product as 3 stars to indicate that it is an average set of line wrench heads. If it had the notch to capture the ball of an extension, I would give it 4 stars. (A skilled person might be able to grind such notch into them with a rotary grinder, but I haven't tried.)
Recommended Products
