Your cart is empty.
Your cart is empty.Product Description
Upgrade PULSE TIG Welder
- New Digital Panel is Easier to Operate.
- Pulse TIG welding is added, which is very friendly to novices. Can weld beautiful fish scale patterns.
- Pulse Welding Can Effectively Save the Use of Electricity.
- Pulse TIG welding can effectively increase the life of the tungsten needle.
Dual Voltage
- The CT-418 can automatically change the voltage according to the input voltage 110V-220V. No additional operations are required.
- Dual Frequency 50/60HZ.
Multiple Protection
- Overheating and overload protection.
- Three anti-coating protection.
- Moisture-proof, dust-proof and leakage-proof.
- Defying the harsh environment.
- Avoid overloading.
- Protection of personal safety.
Professional Ventilation Design
- Our CT-418 adopts high-quality heat dissipation device inside, which can discharge the heat generated by the machine more quickly.
- In addition, this CT-418 adopts four-sided ventilation design to protect our machines to the greatest extent
- Dimensions: 44*35*26 CM ( 17.3*13.7*10.5 Inch)
- Weight: 9.5 KG (21 LB)
Multi-function PULSE TIG Welder/Plasma Cutter/Stick Welder
Performance
- Rated Input voltage: 110/220V±15%
- Frequency: 50/60HZ
- Application: Plasma Cutter / TIG Welder / Stick Welder
- Output Current: 10-40A / 10-180A / 20-160A
- Rated Input Capacity: 3.5KVA
- No-load Voltage: 60V
- Rated Duty Cycle: 60 %
- Power Factor: 0.93
- We provide 24-hour friendly service.
- If you have any questions, please feel free to contact me.
Mike
Reviewed in the United States on March 1, 2025
Instructions are absolutely horrible. No idea how to set up and put it together correctly. Had to go get parts for plasma cutter because it did not come with correct parts for a compressor hook up.Haven’t used the welder yet kinda worried I may have bought a machine I won’t like using and may need to upgrade
Doug Walborn
Reviewed in the United States on January 10, 2024
The plasma cutter sucks. Will not cut the way it said to. It struggles to cut aluminum the thickness of a pop can. tig welder may tack a pop can if it's turned all the way up that's if it doesn't trip the breaker. Not what it's advertised as. junk don't waste your money
sherry l
Reviewed in the United States on July 28, 2023
Very happy with my purchase. Have use a few times. Repaired the deck on my old mower perfectly and the weld has held up well. Great product!!
Dakota
Reviewed in the United States on May 2, 2022
I've been using this machine for about three days now. I have used the plasma cutting function a lot.I tested the tig function, but I don't have a gas bottle, so this was very brief, just to see if the machine would strike an arc - which it did.I have not tried stick welding, I have another machine for that. But I have no doubt it would perform. The amperage is likely a lot higher though. It may stumble, pop a breaker, or underperform.In the lower power settings it does everything I need it to do, and it does it plenty well.I have only run this machine on 110-120v.I use about 30psi for thin sheet metal. 45psi for 1/8inch. I have not cut anything thicker.I do advise you have a large air compressor. I am using two compressors from scrap mini-fridges and an air tank. I get about 15 seconds of cutting for one minute of recharge. This is totally fine for my needs. But if you want longer run times, you will need a large air compressor, and you will put more heat into the machine. Ultimately, heat is the killer of all electronics. It's a give and take relationship. Take more, you get less.For the weekend warrior, this is great! If you need it for full time work, you literally have not gotten to this point of the review. It is not a commercial machine. Don't come in with unreasonable expectations.
Mark C.
Reviewed in the United States on March 17, 2020
The stick welder worked good. The stinger seemed to get hot and cracked off the top end. I couldn't get the plasma cutter to work I could hear the HF clicking in the tower but couldn't get any action at the gun. Tried all the consumables sent with the package. High temperature light kept coming on. probably something with the plasma cutter. Still would be a good welder but short inside or something. I wanted to use the machine for home use.
F. B. Brand
Reviewed in the United States on September 8, 2018
Ive only stick welded with this and its an incredible little welder! Check my first few welds...Some things to consider // The cables are a little short, so worth upgrading at some point - get some good used cables at a swap meet.. the ground clamp is also light weight but works.I havent tried the plasma or tig yet. Im trying to figure out how to use 220 on this, ac inlet says 110AC, nothing about 220 -I was running this between 65-85 on a 1/8 rod no problem. The 601* rods yielded best results, the 7018 had trouble striking the arc.Either way I welded a small gantry to lift small blocks and this little guy did a great job.. Shop around for a good price, the same thing is everywhere under many different brand names.
Mike & Lisa
Reviewed in the United States on May 5, 2018
I made about 6 two inch long cuts in a piece of 18 ga. aluminum and the machine just quit. The fan was running and air came through, but no "fire". No power on the stick setting either. This machine and it's extras are as cheap as the price suggests. You get what you pay for - You pay for what you get. I lost all my vacation time with returning this piecer and getting a better machine on it's way. Lesson learned. Buy the good one first.
Kristina R.
Reviewed in the United States on April 10, 2018
super short leads (like 3 ft), and you will need to buy some large gauge electrical line to wire the AC adapter yourself to fit whatever type of plug you want to plug this thing into. But for the price, this is a great product. I love how light weight it is.
Recommended Products