Shopping Cart

Your cart is empty.

Your cart is empty.

Plug & Play PID Temperature Controller Box Kiln Probe Pottery Glass Annealing

4.7 (3) Write Review
Free shipping on orders over $29.99

$159.00

$ 76 .99 $76.99

In Stock

About this item

  • Its heavy duty kiln thermocouple can measure very high temperatures up to 1300C (equals to 2372 °F ). · Equipped with male and female connector, so you can easily change your thermocouple. · To operate, you only need to plug the heater to the socket wire of the controller at the back, drop the sensor into the Kiln, turn on the power of controller and adjust it to your own requirements.
  • Plug and Play PID one set point Temperature controller box with 15 Amp Maximum current. Equipped with circuit breaker switch 15 Amp (instead of short life fuse) . High Measuring accuracy, ±0.2% or ±1 unit of full input range. Celsius or Fahrenheit display selected on user’s discretion. Calibration function for sensor temperature correction
  • This plug and play temperature controller with Ceramic thermocouple, has a wide range of applications in controlling the temperature of Kilns, Ovens, Furnaces & …. (for loading current up to 15Amp) . This is an inexpensive and heavy duty plug and play controller box. Please consider that if you need to change your sensor to specific one, I can change it for you too. It is One set point temperature controller and if you need ramp and soak please see my other products.
  • Equipped with buzzer and flasher alarm for passing high and low temperature or thermocouple failure. Temperature control range -50 to 1300 °C (-58 to 2372 °F)
  • Shipping to USA is 3-6 business days. For more information please go to our website Thermomart


Specifications: Input voltage 90 to 260 VAC - 50 /60 Hz; No transformer or adapter is required. Output voltage Same as the input. with one set point temperature controller Maximum Current 15A Controller Mode 1) :P, PID ,PI, PD, ON/OFF(P=0) 2) Auto setting control Output switching device Solid State Relay (40A - 24/240V AC) with zero voltage crossing switching. Sensor Type Type K 6pc Ceramic Kiln Thermocouple Temperature control range -50 to 1300 °C (-58 to 2372 °F) Thermocouple Thread material Cr-Ni, Si-Ni Thermocouple Thread dimensions 3.2mm (diameter ɸ) x 190 mm (long) / (0.13" x 7.5") Sensor cable length 3.3 ft (1m) Ceramic tube shape 6 x (1 inch Pcs, two-hole insulator) Ceramic Tube Ceramic tube diameter Oval shape: L=12.3 mm & W=10mm (L~ 0.5” & W~ 0.4”) Ceramic tube length ~150 mm (~ 6.0 inch) Box material & Dimension ABS 200x120x75mm ( 7 3/4 x 4 3/4 x 3" ) Temperature resolution Dual 4-digit LED display, 0.1 for K type and 0.001 for analog input Temperature display unit Fahrenheit (°F) Celsius (°C) Temperature accuracy Measurement: ±0.2%FS Control Accuracy :+/- 1 Celsius Input K (-200~+1300ºC) . But the controller can connect to following input too, S (-50~+1600ºC), Wu3-Re25 (0~2000ºC ), R (-50~+1700ºC), T (0~400ºC), E (0~900ºC), J (0~800ºC), B (200~1800ºC), Pt100 (-200~800.0ºC) or (-200~+600ºC), mV,mA,VDC (-1999~+9999)


Brad G.
Reviewed in the United States on March 30, 2025
Awesome controller. Works great. Made holding a annealing temp a breeze
Adele L.
Reviewed in the United States on February 14, 2024
This controller is ideal if you have a 110v oven or kiln that has an infinite switch. I can now set my annealing oven to the correct temperature and this controller eases up to the set point and dwells nicely.It will improve my art and save me a huge amount of time spent watching and adjusting the infinite controller.
Andrew
Reviewed in the United States on February 23, 2020
Upon arrival one of the quick connects to the probe wasn't secured and took me a little bit to figure that out. However this has been a great plug n play controller!