Your cart is empty.
Your cart is empty.
Feature:
1. Silver contacts are used for movement and static, which greatly improves the conductivity and service life of the product.
2. Built-in normally standby opening signal output port, which can be connected to signal indicator.
3. Using flame‑retardant plastic material, good insulation, high temperature resistance, safe and reliable.
4. When the normal power supply is abnormal, the backup power supply will work immediately to ensure the continuity of the power supply.
5. Small size, easy to carry and store, convenient to use and with good performance.
Specification:
Item Type: Dual Power Automatic Transfer Switch
Model: ZGQ5-100/2P
Material: Plastic
Purpose: Switch to the backup power supply when the power fails, and switch to the main power supply when the power comes in.
Working Frequency: 50-60HZ
Rated Current: 100A
Rated Voltage: AC110-230V
Working Voltage: AC220V
Operation Mode: Automatic and manual
ATS: CB level
Conversion Time: ≤0.05 (S)
Number of Poles: 2P
How to Use:
1. Place the automatic transfer switch of the dual power supply on the debugging platform, and connect the corresponding power line in the correct phase sequence. The phase line and the neutral line are connected in position and cannot be connected wrongly.
2. When debugging the three-pole switch, the common and spare neutral wires should be connected to the neutral terminal (NN and RN) respectively.
3. Set the dual-power automatic transfer switch to work in the self-turning and self-resetting mode. If the voltage of the two power supplies is normal, the switch should be placed in the common power supply position and the common power supply is closed.
4. Set the common power supply NA, NB, NC, NN for any
