My son has an auto detailing business and wanted a longer hose for the power washer with quick connect capability. I found this & hoped it was what he was talking about so I was worried when it came but he was very happy! He said it was exactly what he was looking for and after using it said it made a big difference from the hose he was previously using.

My OEM hose for my 3300psi pressure washer would easily tangle and was extremely difficult to work with under pressure. I would normally have to remove the pressure head, and walk thr hose out in a straight line with the trigger enabled to untangle. With this new cable I don't have to do that. It is so much easier to work with and even easier to roll back up when done cleaning. The quick disconnect adapters it comes with are also what makes this a good value for your money, and a great upgrade!

Compatible with both gas and electric pressure washers.50-foot length offers great reach for a variety of tasks.High durability and can withstand up to 4000 PSI pressure. Kink-resistant and flexible, reducing tangling and improving maneuverability

This is a flexible hose whereas my original hose is stiff. Both do the job but this one allows me a little more flexibility. It still requires me to completely unroll and straighten before use or it will coil up and kink, but it is durable and leak-free. With the addition of the extra fittings I'd say the price is on point. It definitely helped me save some backache lugging the washer around.

Wanted a more flexible hose for my pressure washer, this was a perfect solution, fits well and is super flexible, the quick connects are also super nice

This is a nice little hose. It has made my life easier when using it. We have a new modular home that was built in 2022. One thing I did not realize about modular & manufactured homes was how much care the vinyl siding would need. I had never lived in a home with vinyl siding before & after Florida's rainy season, the side of the house that really doesn't get much sun started getting some green algae in places.. No thank you. I had already planned to pressure wash the house at least once a year, but this motivated me to do it sooner. Because the vinyl is slightly textured & doesn't run straight down, there are spots for moisture to grab onto.We bought a pressure washer to get rid of it without have to use a deck brush over the entire house. I didn't want to have to tote the whole washer around with me everytime I moved 5 ft though. Enter this little hose.It connected perfectly to our pressure washer via one of the adapters. There were no leaks, everything fit tightly. The presser washer came with a spray gun, but we also have another smaller handheld one. They both fit the end of the hose with no problem, we didn't need an adapter for either, it screwed right on. Again, there were no leaks, & they were easy to tighten on & get back off again.Sometimes I worry about hoses that use plastic to tighten over connection points (however metal can have it's own problems). It can degrade & break down over time, but also if you drop the hose on concrete, the plastic might crack. So far no issues in that department, & this connector does feel durable. If it gets whacked hard enough, it will crack though, so keep that in mind.The hose came with various male & female adapters to connect it to different pressure washing models. It also has an extra o-ring, which I appreciate. Sometimes when you have a little bit of water leaking that is the only problem, change out the o-ring.This is not going to connect to your regular spigot.I tried to kink this hose without water in it & it's basically impossible, even more so when there is water pressure on the inside. The hose itself feels strong & thick. I got the same pressure while it was connected to the washer as I get when I do not have a hose connected. I think the diameter of the hose has a lot to do with that. If it was any wider there might be done loss of pressure.It's a perfect length for walking around feely without having to move the motor too often. I can walk back & forth spraying a whole side of the house. I also can put the washer on low & walk all the way around the car.I'm really glad I came across this hose. It definitely cuts down the time it takes me to pressure wash anything & it still does it effectively. Any kind of sturdy, well made hose now is not cheap. My hubby just got us a 50ft hose for our back & it was $90 or something like that. For $28 this thing is definitely worth it.

Worked great as a replacement for a hose that would not lay flat.

This is a review for: "Pressure Washer Hose 25 FT x 1/4"，Kink Resistant Power Washer Hose with M22-14mm and 3/8" Quick Connection Kit，4000 PSI Replacement Power Washer Hose for Electric & Gas "First I really don't like the fat screw ends on this hose it isn't the standard long skinny I am used to seeing but whatever I can live with it. It has the standard M22 ends. The quick connect and adapters are a nice touch if you are changing fittings on the equipment but they didn't fit anything I had so they did not meet a specific need I was after with this hose. My wife got an electric pressure washer that she could manage, I didn't like the hose which was very stiff and short so I got this which works much better but I am going to need to find an adapter as the hose that came with it had a quick connect unfortunately the quick connect set that was included with this set was not the same one so I couldn't use them so I will need to source the correct one to use as I intended. I has a barrel so I was able to extend the M22 end with this and it worked perfectly.If you are constantly changing ends and using the quick connects this comes with a nice water draining storage bag for the fittings.