Your cart is empty.
Your cart is empty.
Part Number
PT392-34140
Fit For
2021 Tundra 1794 Edition, Limited, Platinum, SR, SR5, TRD Pro 5.7L V8 - Gas
2020 Tundra 1794 Edition, Limited, Platinum, SR, SR5, TRD Pro 5.7L V8 - Gas
2019 Tundra 1794 Edition, Limited, Platinum, SR, SR5, TRD Pro 4.6L V8 - Gas, 5.7L V8 - Flex, 5.7L V8 - Gas
2018 Tundra 1794 Edition, Limited, Platinum, SR, SR5 4.6L V8 - Gas, 5.7L V8 - Flex, 5.7L V8 - Gas
2017 Tundra 1794 Edition, Limited, Platinum, SR, SR5, TRD Pro 4.6L V8 - Gas, 5.7L V8 - Flex, 5.7L V8 - Gas
2016 Tundra 1794 Edition, Limited, Platinum, SR, SR5, TRD Pro 4.6L V8 - Gas, 5.7L V8 - Flex, 5.7L V8 - Gas
2015 Tundra 1794 Edition, Limited, Platinum, SR, SR5, TRD Pro 4.6L V8 - Gas, 5.7L V8 - Flex, 5.7L V8 - Gas
2014 Tundra 1794 Edition, Limited, Platinum, SR, SR5 4.0L V6 - Gas, 4.6L V8 - Gas, 5.7L V8 - Flex, 5.7L V8 - Gas
Wade Church
Reviewed in the United States on May 5, 2024
First time I tried to use the step, the step snapped off. Luckily I had one foot one the ground I didn't get hurt falling. Supposed to be rated at 300 lbs, but don't trust it. I'm no where near 300 and didn't even have all my weight on it. Find a better brand to buy and save yourself a hassle.
Bryan K
Reviewed in the United States on May 31, 2024
Very helpful. I’m not as young as I use to be. Make it so much easier to get into the bed of my truck.
Vanessa
Reviewed in the United States on March 25, 2024
Bought this for my 2016 Tundra Crewmax & so far it works great. Tossed the directions & saw a you tube Installation video that explained everything step by step. I didnt use the bracket that was included, i used a sawzall to make a couple of cuts on the existing bracket and it probably shaved off an hour from my install time.
Brian
Reviewed in the United States on October 22, 2024
It is solid, flexes a little bit, but I'm about 220lbs. It bolted right to the frame on my 2011 Tundra Crewmax without any modifications.
Gabriela
Reviewed in the United States on April 16, 2024
Lo colocamos como escalón para subir a la parte trasera de un pickup y aunque la base es de metal y estable, lo demás es ese plástico y no aguanto el peso al subir el primer pie y se quebró. Los pequeños tornillos que unen el escalón con la base no fueron resistentes. Lo compramos porque soy pequeña y peso 50 kg, se rompió el plástico y no sirvió de nada. Difícilmente hubiera aguantado el peso de mi marido que pesa 20 kilos más que yo. Fue una pérdida de dinero. Tuvimos que pagar un escalón aparte y soldarlo para que estuviera resistente. Lo único bueno es la base de metal.
Dave Delle
Reviewed in the United States on April 1, 2024
The instructions call for removal of the license plate light, trailer plug and then the plastic bumper cover to remove and replace the bumper support bracket. (That square bracket in the picture) There's a catch "22"situation here. The cover needs to come off in order to remove bolts holding the support bracket. But you can't get to some of the plastic tabs holding the bumper cover on because they are behind the bracket! I decided to not remove the bracket and just cut away the part that would interfere with the step. The factory bracket is much stronger than the one they supply anyway. So I traced the outline of the bottom of the new bracket onto some cardboard and transfered that to the existing bracket, then I used an angle grinder with a cut-off wheel to trim the bracket. This was much faster than removing the bumper cover. I don't think you can remove it without damaging the retaining tabs on the plastic bumper cover. I believe you could use a jigsaw with metal cutting blades to do this if you don't have an angle grinder or die grinder with cut-off wheels.
Customer
Reviewed in the United States on December 25, 2023
It was a lot of dishes assembly of my existing truck, bumper and brackets to be able to install this one. That said these things are awesome. This is the second one I’ve had on two different trucks so they are worth the effort.
Chris M
Reviewed in the United States on October 17, 2023
The step makes getting into the truck much easier. Very easy to install if you don't follow the directions. When you get the step take a look at the bracket, they send you then take a look at the bracket they want you to remove. It's much easier and quicker to simply cut out the cross member with a sawsall or grinder than it is to deal with removing all the pieces of the bumper. I traced the bottom of the new bracket onto a piece of cardboard then used that as a template.
Recommended Products
