Your cart is empty.
Your cart is empty.Product Description
PTCYIDU NEW TYPE PTC Thermistor Heater Mini Air Heating Constant Temperature - 110V 200W
Welcome to PTCYIDU!
For more than twenty years, we have been committed to manufacturing various types of PTC heaters, which are exported to various places and used in various small heating machines and large heating instruments, such as incubators, air conditioners, heaters, electric heaters, instruments, general appliances, air curing machines, humidifiers.
HEATING ELEMENT WITH POWER CORD
- Package Including: 1x Fan heater + 1 x Power Cord
- Our PTC heater fan have characteristics of automatic energy saving system.
- This system allows an automatic regulation of the heating power within certain ranges. When the air was warmed, it could consume less power energy than before.
WIDE APPLICATION
- Suitable for heating, dehumidification and warmth in a small space of less than 0.5 cubic meters.
- Such as 3D printer, automobile dehumidification heating, small electric thermostat incubator etc.
HIGH QUALITY HEATING MATERIAL
- Our heaters with insulator on surface, this item is safe to use, high reliability. It can heat up quickly with long service life.
- With mounting holes, it is easy to install. It adopts high temperature wire as leading wire, durable.
- This system allows an automatic regulation of the heating power within certain ranges.
- Application as Egg Boiler ,Hair straightener, yogurt maker, Instrumentation dehumidification, Chocolate extrusion, coffee maker, also used for car and components preheating.
- This PTC heater part is used for heating solid; This material has a characteristic that it is constant temperature on the surface.
- The power is reference value, the better the dissipation is, the bigger the power is. In different working environments, power will have a plus or minus 20% tolerance.
- The power of all PTC products is not a fixed value, but a range. The power range of this fan heater is within the (+20%) range of the labeled power. The power of different ways of using the same product is different. Simply speaking, the better the heat dissipation, the greater the power.
- There may be a slight deviation in the measurement of product.
jw
Reviewed in the United States on March 5, 2025
While this does work effectively there is a bit of concern about the safety of the wiring at the heater itself. After running this for 10 minutes the joint where the 3 power feeds to the ptc crimp together get extremely hot. I opened it up and put a couple wraps of Kapton tape in separating the hot and neutral joints just in case it melted. I wouldn't leave this thing running unsupervised, I believe the leads to the heater itself are undersized causing the issue. That being said the joints, heat shrink and crimps look fine otherwise. When running it definitely has a smell and the noise is tolerable. I'm using it for a filament dryer, in an uninsulated 19litre water tight box box it gets up to 150F in about 10 minutes or so. I haven't used it for the full drying time yet so my review may change.
Eric
Reviewed in the United States on March 12, 2025
Bought this for my 3D printer enclosure to help with printing engineering filaments like ASA. This works like a charm! Puts out a decent amount of heat, especially for its compact size. Great value for the money here! Air flow won't blow anyone away, but you don't really want a TON of airflow for a heater like this - just enough for circ. Looks like it's well engineered, too.
Matthew Rosborough
Reviewed in the United States on February 26, 2025
Been using it for a few months now for starting seedlings and it works well when used in tandem with a temperature control probe. Heat output persists in its intensity and ability to reach high temps quickly, build quality remains intact so far.
Coolpaws
Reviewed in the United States on February 18, 2025
So far so good, I needed a small heater to control the temperature in a 3sq ft control box outside and it is performing well in 15-30 degree outside temps and has no problem maintaining 45degrees on a thermostat.
Brian
Reviewed in the United States on January 4, 2025
I use this to keep my boat engine compartment warm through the Wisconsin winters. It works wonderfully.I would highly recommend
Dave
Reviewed in the United States on December 7, 2024
Installed this in my RV unheated basement compartment with a Vivoon Sun thermostat to keep my RO water from freezing... works great!
michael p
Reviewed in the United States on December 15, 2024
I'm very satisfied with these little heaters. They work well and have good quality wiring and build quality. I have mine plugged into a thermostat that takes all the worry out of things.
John D. Paden
Reviewed in the United States on October 6, 2024
PTC Fan Heater with Power Cord 110V 400W Electric Ceramic Heating Element Energy SavingThis is a great little product. We have integrated into our electronics containers and they have worked great. Very simple construction and priced very well. Have used for one field deployment so far and all 8 units were fine.Combined with "bayite Temperature Controller 1650W 15A BTC211 Dual Digital Outlet Thermostat Plug," also available on Amazon.
Recommended Products