Your cart is empty.
Your cart is empty.Pyramid Model : TW46
1.5'' 400 Watt Die-Cast Aluminum Titainium Super Tweeter
- 1.5'' Titanium Super Tweeter
- Die Cast Aluminum Frame
- 1.5'' High Temperature Kapton Voice Coil
- 60 oz. Magnet Structure Weight
- 400 Watts Peak Power
- 4-8 Ohms Impedance/Ferro Fluid Enhanced
- Sensitivity: 105dB
- Frequency Response: 2k-25kHz
- Single Pack in Gift Box
- Crossover Capacitor Included
- 4'' Diameter/2.5'' Mounting Depth
Joseph
Reviewed in the United States on July 9, 2024
This is a very bad product. It has failed after just a few weeks of use. The max wattage on my appliance is 250 w, and the raring of this speaker is either incorrect or the speaker itself is very poor quality.
Jeff Greenlee
Reviewed in the United States on March 11, 2016
Great tweeter for the money, I paid less than $9 ea. for 12 of these to use 8 ea. in a PA system, 4 per speaker. Series Parallel to make 8 ohms. These are NOT 4 to 8 Ohms like it is advertised, they all measure 6 ohms DC with a meter, that makes them an 8 ohm speaker. Don't know what is up with the tiny junk capacitor it comes with, 2.2uf @ 100V? Not the one in the picture. No, throw that junk in the garbage & put on a better quality non electrolytic cap. Rated at 400 watts peak, & 200 Watts RMS, good luck with that, more like 150 Watts RMS if your lucky. But you cant complain for the money.
Jairaj S.
Reviewed in the United States on December 7, 2016
Works as it should, bought it as a replacement for a broken one that was in my bass cabinet speaker, took all of 5 minutes to install and it sounds great!
Ragner Azenos
Reviewed in the United States on December 25, 2013
Love these they are really loud, but they are huge! they say 1.5 i was thinking it was going to b really small it its almost the size of a 6.5 speaker i bought this and i also had to go buy a dremel tool just to make it fit inside my car its insane how big this is but once u have it in u will not be disappointed i'm giving it a 4 star just because the crossover looks amazing in this picture and its really really flimsy i had to glue it to the top its just this little black thing and i thought i was going to break it just moving it around but other then it being really big and the crossover it is a really good tweeter
suzi
Reviewed in the United States on December 31, 2011
Wow !!! are you kidding me ? NICE tweeter (just look at the specs)Installed these into two home speakers that had blown 1" dome tweeters. The sound is awesome along with the crossovers I installed. The price was definitely right for these rock solid tweeters. Shipping was perfect. Get These Tweeters !!! Thank you Amazon for your excellent service. Rock on !!
Az Friend
Reviewed in the United States on October 16, 2011
Huge magnet size for the moneyThe physical down side is that you have to cut out the hole just enough to drop the magnet through because the mounting screws are about 1/4" next to the hole. Plus you have to cut out extra notches for the terminals to get through. You don't want to bend the terminals down to sharp. As seen in the picture, there is a chrome plated ring right below the terminals that you don't want the terminals shorted to this ring! You might want to solder the cap/wire to the terminals instead of using the plugs so it could be easy to drop in the cabinet.Cap in the picture is not what you get from the package!The type of cap in the picture is better with voltage rating is up to few hundreds while the supplied cap only rated 100VIt's loud enough that you don't want to use any cap that bigger than the supplied cap: 2.2uF to eliminate the mid range freq4 to 8 ohm impedance!?The actual resistance of the coil is about 6 to 6.5 ohms, plus the 2.2uF cap to the positive terminal, I would use it at an 8 ohm impedance settingIt's easy to handle 150W RMS output amp with nice sound of the hi-hat cymbals!It's not a horn type, but use small cap, pay less, it still produces nice sound and can handle the power, a big bang for the buck!
David Spangler
Reviewed in the United States on June 5, 2010
This tweeter is also used in the Schroeder 1212 Light bass guitar cabinet. I was building another bass cabinet and decided to use this tweeter. The included crossover capacitor might be OK for car audio but not for bass guitar. I am using a 12dB per octave high-pass filter to afford much greater protection.It is heavy-duty and very efficient and very well suited for use with bass guitar. Another feature is that the diaphragm is user-replaceable for about half the cost of the entire unit.
Matthew Valcourt
Reviewed in the United States on October 15, 2010
These tweeters are great! however if you were wondering it does not come as a pair. When you order this you will receive only one. Some other tweeters can be bought in pairs these however cannot be. Besides that wonderful surprise in my box these tweeters have been great. Can't wait to hear them once they have been broken in.
Recommended Products
$119.99
$ 55 .99 $55.99
$104.96
$ 42 .99 $42.99