Your cart is empty.
Your cart is empty.The RØDE VXLR Pro is a female TRS mini-jack to male XLR adaptor for connecting RØDE microphones with a 3.5mm output to devices with an XLR input. It utilises an internal transformer to convert an unbalanced signal to a balanced signal, making it ideal for connecting a microphone with an unbalanced output to mixer or interface. Premium componentry ensures extremely low noise when a long cable run is necessary. The VXLR Pro also converts 12-48V phantom power to 4V plug-in power, allowing microphones such as the VideoMicro and VideoMic GO to receive power from XLR devices and it features a locking connector that will ensure your connection is always secure when recording.
theamazingrando
Reviewed in the United States on March 9, 2025
worked as need. These have some heft to them.
Ricardo
Reviewed in Brazil on January 25, 2025
Atendeu muito bem , mas a rosca não é compatível com todos os microfones. Pode até ser com os da RØDE, mas não com SENNHEISER. Porém funcionou muito bem
Jose Luis F
Reviewed in Mexico on July 11, 2024
Imagina que por mucho tiempo tuve el problema que unos micrófonos se escuchaban bien y otros no… Sin embargo con este VXRL Pro de RodeAdiós problemas, alta nivel de calidad, súper recomendable .
Dancer
Reviewed in the United States on June 26, 2024
I absolutely love this little gadget. I can run inexpensive lapel mics over very long XLR cables, and the built-in preamp or conversion circuitry is incredibly low noise .Will definitely be getting more of these as I need them.It's relatively expensive for what it is, but it is built like a tank, and you can feel the build quality as soon as you pick it up.
Sean McGoey
Reviewed in the United States on May 24, 2024
Works great
Richard O.
Reviewed in the United States on December 17, 2024
If you plugging in something like a Lark Max or Hollyland M2 or any kind of wireless 3.5mm mic and having audio level problems into your mixer/RCV or RCDuo, this little device is designed to make it work perfectly.It’s pricey sure, but it works.Typical Rode, always making products that do what they promise, I bought 2 :)
David Curtis
Reviewed in the United States on November 25, 2024
I use 2 of these to connect lavalier mics into my Zoom F3 recorder. They are sonically transparent, they provide 4 volt plug-in power to the input, they have balanced output. Solid build.
Kunde
Reviewed in Germany on August 22, 2023
Rode VXLR ProIch habe extra die zwar etwas teure PRO Version des Adapters gekauft. Nur dadurch ist "Balanced Audio" Signalübertragung über XLR Kabel möglich. (Bei der +Version ist es egal wo man den Adapter platziert immer nur ein "Unbalanced Audio".Preis: Nicht billig aber sieht wertig aus.Funktion: EinwandfreiHaltbarkeit: Kann ich nach so kurzer Zeit noch nichts sagen
La Toyia
Reviewed in the United States on July 15, 2023
Was looking for a way to convert my TRS 3.5 mm camera microphone to XLR so that I could connect it to my audio interface and the VXLR Pro was the solution.
can36
Reviewed in Japan on November 3, 2023
表題の組み合わせで問題なく利用できました。オーディオ変換ケーブルは、オーディオ変換ケーブル φ3.5mm ステレオミニジャック(メス) - φ3.5mm モノラルミニプラグ(オス)×2 10cm VM-MSB-10cmを利用。2個でそれなりの値段ですが、高価なバイノーラルマイクを購入する前に、安価なプラグインパワーのバイノーラルマイクを使ってテストしたかったので問題なし。
ravi
Reviewed in Australia on October 16, 2023
Used it with rode wireless 2 and bose s1 pro for 3.5mm to xlr conversion, balanced output. Well built product
Another Customer
Reviewed in the United States on September 3, 2022
Was able to connect my RODE HS2 Wired Headset to the RODE VXLR Pro to my RODECaster Pro 2 and it works PERFECTLY! This can also be used on any 48V XLR type processor and the VXLR adjusts the voltage.
Giles Gilbert
Reviewed in the United States on October 5, 2022
I’m using this with some iec711 earphone frequency curve mics from china. Allows me to use a decent interface with a good frequency response rather than a dongle with a poor frequency response. Awesome!
Recommended Products
