Your cart is empty.
Your cart is empty.Product Description
- High pressure coupler (red) with inner diameter 16mm
- Low Pressure coupler (blue) with inner diameter 13mm
- Suitable for all standard valve cores, car, truck, motorcycle, bicycle, electric cars, etc., as well as air conditioning units.
- 5 Pc x R134A Valve Core
- 5 Pc x 5V1 Valve Core
Easy Install:
Step1: Pull out the tool valve rod and close the valve, connect the tools to the car air conditioner quick connector
Step2: Open the tool valve, push the stem in and clockwise rotate the end knob.
Step3: After loose the valve core, pull out the lever and close the valve.
Step4: Unscrew the extremity port and remove the valve core.
eloy Pina
Reviewed in the United States on March 18, 2025
I recently purchased the R134A Valve Core Quick Remover Installer Tool Set, and it has been a game-changer for my AC maintenance. The build quality is excellent, with durable materials that feel solid and reliable. The kit includes both high and low-pressure valve core removers, making it versatile for different systems.What I love most is how easy it is to use—removing and installing valve cores without losing refrigerant is a huge plus! It saves time and prevents unnecessary mess or waste. Whether you’re a professional or a DIYer, this tool set is a must-have for anyone working with R134A systems.Highly recommend! If you’re looking for a well-made, efficient tool, this is definitely worth adding to your toolkit.
Angel Morales
Reviewed in the United States on April 6, 2025
All excellent 👌
juls
Reviewed in the United States on April 15, 2025
A few negative reviews on here said that the valve stem removal part of the tool didn’t clip onto their existing valve core wings. It does not capture the valve at that point, it captures the actual valve stem. When you push it down you should feel a click. The tool works perfectly.
Edward A Hyland
Reviewed in the United States on April 1, 2025
Worked great for its intended purpose. I just replaced the A/C in my daughter’s car and in the process I damaged the original low pressure valve which I didn’t find out until I removed the gauges. I quickly selected this tool with fast shipping to avoid losing the refrigerant and having to evacuate the system…again. Product arrived and I was able to change the valve core in minutes with no further loss of refrigerant/oil. A must have cheap DIY tool to have in your toolbox. Often you’ll find a leaking valve core after removing the gauges or adding refrigerant. Recommend putting a little Nylog on the rubber and inside the tool to help the valve core stay in the tool for easier removal/installation.
Greg Todd
Reviewed in the United States on April 1, 2025
I used this to successfully replace the high and low valve cores on my 2002 Saturn SL2 while the refrigerant was still under pressure. It was a quick job.Negative: The gap in the tip of the driver is too large to lift out the old core. It dropped my first core, I had to apply a bit of sticky tack to the driver to retrieve the core.For the second core, I slightly bent the tip of the driver to tighten it's grip. It then worked perfectly.
Jeff morris
Reviewed in Canada on August 3, 2024
Metal is poor quality had a tight valve tool just split with no effort on the valve brass handle spun off the shaft on second tool for sealed valve removal. Just another cheep gimic tool on Amazon made in China
Dyan Bragado
Reviewed in Canada on August 20, 2024
It works
TO
Reviewed in the United States on July 1, 2024
I was able to replace a valve without losing Freon however getting the bad valve stem through the body of this tool was a challenge Valve stem kept getting hung up halfway out. I finally used the Freon to blow bad stem out.
cj2121
Reviewed in Canada on July 1, 2024
Didn't expect much, but was able to switch out low side valve without loosing any refrigerant, does exactly as it states
Jesse
Reviewed in the United States on May 22, 2024
The fit was good and was working till the valve was open to remove core. The O ring would not seal properly when punger was pulled back. Lost more than half of my refrigerant. Then list more installing core... Don't buy because it's cheap. It cost me a trip to auto part store for almost $100 of replacement refrigerant.
Dave K.
Reviewed in Canada on September 21, 2023
A1
Caleb Coffie
Reviewed in the United States on September 14, 2023
The R134A Valve Core Quick Remover Installer stands out as a must-have tool for professionals and DIY enthusiasts alike. Its design ensures a swift and hassle-free valve core removal, minimizing the risk of refrigerant loss. Built with precision and durability in mind, this tool not only speeds up the process but also guarantees consistent results every time. A game-changer for those in the HVAC and automotive sectors. Highly recommended!
CK
Reviewed in Canada on October 1, 2023
The idea is that you won't open up the closed ac system, so not air or moisture gets in. So far so good, it actually is easier than you think (or not). The only problem as experienced by some here is that one of the forks will not grab the schrader valve once you unscrew it. The fork is too big. I just put some grease on the end and it somehow sticks to it. You could probably also use some other sticky stuff. So I asked myself why did they do this. It came to me when after changing the schrader valves, my ac system was still leaking. The reason for this is that the small schrader valves look all the same but they aren't. The supplied one did not work for my car, so I ordered a complete set here on amazon and found one which not only sealed my ac but also fit the supplied grabbing fork. Good luck.
Recommended Products