Your cart is empty.
Your cart is empty.Product Description
RC 20A Brush ESC Motor Speed Controller 2KHz Forward Reverse Brush Brake for RC Car Boat Tank
20A brush speed controller.
Function: forward, reverse, brake
working voltage: 3.0V---9.4V.
Diaensions(L*W*H): 27.0*23.0*8.0mm
Current(A): 20A
Driver frequency: 2KHz
Input: Li-Po 2S / Ni-Mh/Ni-cd 4-7cell
Constant current 20A Max 25A< 30s Pulsed 50A< 5s
Brake On / with brake
This ESC can work with 130/180/260/280/380 Brush Motor
Note: Cable colors may vary from batch to batch. Your product may not match the color shown exactly, send the cable color at random.
Package Included:
2 x 20A Brush ESC Speed Controller
anthony santos jr
Reviewed in the United States on September 12, 2024
I like the size and water proofing of the esc
Wrecker RC
Reviewed in the United States on July 6, 2024
If your not using this as an esc but as a winch controller, make sure you unplug the red wire in the cluster of three. Your esc is already providing power to the reciever.I am running it on 3s. Via a direct power setting using a momentary 3 position switch setting on the controller. Through my testing, it works well so far.Will update as needed.
Katelyn
Reviewed in Canada on August 20, 2023
Over heat and make noises . Both fried .
Tim Blackurn
Reviewed in the United States on September 6, 2022
They work perfectly but you have to be careful. If you hear anything like it glitching out and not working turn it off right away to save it from burning up!Turn it back on and it should work fine. 😊I mean really, what more do you expect from a cheap buy FAIRLY quality piece of electronics 🤔🤣
Svengooli
Reviewed in the United States on June 24, 2022
I bought a 2 pack. Connected the first one and it started making a wizzing alarm sound? It got hot an never worked again. The second one worked fine for about a year in my wpl before it let go. They work just make sure you keep your hand on the on off switch and if it bonds and then sounds funny turn off and on again until it doesn't make a strange noise. They will work if you don't let them heat up when they do that. Honestly unless space is the only concern just spring $20 on a hobbywing 1060. If space matters just buy 5 and replace as needed I guess.
Jerry
Reviewed in the United States on February 16, 2022
I like the size, but it worked sporadically, sometimes getting hot on power up, I had to disconnect immediately. One smoked and fried. Seller did replace the bad one for free
Little Sieter
Reviewed in the United States on February 26, 2021
Put one if these in a losi micro desert truck to be able to go to lipo and 2.4 ghz radio. Works perfectly! Is small enough to fit and i haven't even trimmed the wires yet. Only running 1s lipo. Gonna try 2s lipo and hopefully dont blow the tranny. Im sure itll yank wheelies on 2s.
Stingerssx
Reviewed in the United States on December 29, 2021
DO NOT BUY THESE!!!!!I thought, how can there be so many bad reviews, but so many good? Why not take a chance?I have a couple of WLToys K989 1/24th scale RC cars. They have a brushed ESC/Receiver combo. One stopped working. I wanted to use my transmitter that I use for all of my RCs. So I bought this 2 ESC set. One didn't work at all, the other got hot and started smoking. So I got a replacement. This time, again, one didn't work at all, the LED just stayed lit and the motor didn't spin when throttle was applied. So I tried the other one. It completely melted. and caught my battery on fire.Needless to say, I returned both sets, (all 4 ESCs).
Guahan671
Reviewed in the United States on October 13, 2021
Ok so I've been through about 5 or 6 of these esc's from 10A-20A. Same type, different seller & brand, yet ALL same issue, with different motors, batteries,etc.These ESC's are a great QUICK TEMPORARY replacement. Not meant to be used & abused for normal daily use. For the price, I'd recommend it. I'd also HIGHLY recommend getting the 2 pack or more for peace of mind due to how fragile they are. Yes FRAGILE! I'll explain more on that later (which you NEED TO KNOW).As for performance & build quality, they are okay. It'll give you that power you need, probably more than you expect from this little guy! They're awesome if we'll taken care of, & mindful of connectivity.********IMPORTANT ****So if you noticed, lots of other reviews mention how "it blew" or "fried" etc. This is TRUE! But after frying my first 2, I figured out how to prevent this from happening. (Not sure why they do this, I'm no electrical wiz)* I just know basics, & basically, if you connect the esc properly, & either hear a crackling or buzz coming from it, DISCONNECT FROM BATTERY /switch OFF IMMEDIATELY! or it'll short out/FRY up. After disconnecting, feel the esc if hot, (most likely will be if encountered this situation) it'll cool off in about 2 mins, then go ahead reconnect & it should be golden! If not, repeat disconnection step again (most is twice if anything) other than that, if you didn't let it get over heated like about 15/20 seconds** not shutting down during short* , then its a great replacement. I still have one more left that I purchased about a year ago, but used about 12 hrs on it already. It still works great, only thing is I may have let it go too hot the other day testing a motor out, it sometimes doesn't kick on. The other esc I have of it, suddenly stopped transmitting the signal to receiver unit. (Turns on, no power sending to receiver of RC) STILL mint condition so I scrapped it for its wires but the chip still works.They're great escs IMO, I'll buy again if needed to. If you need manual, look online @flysky20/30Aesc pdf on search engine. Other than that, it's a straightforward connection.{(F )JST-POWER, (M) JST- MOTOR, & SIGNAL PIN. that's it.} not much of a difference IMO.
Recommended Products
$191.79
$ 77 .99 $77.99