Your cart is empty.
Your cart is empty.Product Description
Product Description
Real Wood Edge banding with Hot Melt adhesive
The white oak wood veneer edge banding is made of premium quality pine wood with smooth surface and natural grain.
Pre-glued with hot iron Adhesive
It is Pre-glued iron on With high quality adhesive and finely sanded to perfection.
Natural Texture
Pre Glued Edge Banding made by real pine wood,backing with hot melt adhesive which with high stick effective.
How to use
Applied with either a regular household iron, hair dryer or edge banding machine, this pine edge banding is really easy and quick to apply.
Position the edge banding onto your plywood or other surface and smooth over with a hot iron or other heat source.
White oak Wood Veneer Edge Banding Tape
ebpsneer White oak Wood Veneer Edge Banding is made of natural wood, it is easy to process and durable.
Our wood veneer is pre-glued with top-quality hot melt adhesive that provide a strong bond, it also can be remove and reheat.
The glue is activated by heat and will strongly apply this high-quality veneer edging onto your shelf, furniture edge,Desk,door frame,cabinet,plywood,MDF,partical board,OBS board or wooden DIY project.
It's easy to use,just apply it to the furniture edging and iron on with a household iron.
Size 1: 2" x 50'( W50mm-L15m)
Size 2: 3/4”×50’ (W19mm-L15m)
Size 3: 7/8”×50’ (W22mm-L15m)
Size 4: 1/2”×50’ (W13mm-L15m)
Size 5: 1-1/2”×26’ (W3.8mm-L8m)
How to Apply for Furniture
Wood edge banding roll can be applied with an iron, hot air blower or it can be applied with an edgebander machine. Trimming and sanding as required after the glue turning dry.
Use a steam iron or dry iron,Do not use steam with water, dry heat is required.
Switch to "Fleece" or similar gear, then hold for about 3 seconds and move forward(Don't press it too long, otherwise it will burn the edges).Before operation, try for a short period to master the method. If the hot melt adhesive does not melt or burns the edges, please adjust the pressing time or gear appropriately.
Simply use household iron, hairdryer with hot wind or edge banding machine to attach. Trimming and sanding as required after the glue turning dry.
FINISHED PROJECT
Carlos Martinez
Reviewed in the United States on December 14, 2024
This is red oak and so thin it is some what transparent. On the picture one can see the difference on red vs white. The rear last two boards, that edgeband is real white oak. Very disappointed about it.
Toney G.
Reviewed in the United States on November 5, 2024
Will buy again
Recommended Products
$225.75
$ 89 .99 $89.99