Your cart is empty.
Your cart is empty.This Superlift Dual Steering Stabilizer Cylinder replacement kit is intended to replace the cylinders used in any inline dual-stabilizer system(s), regardless the brand, as long as the bracketry of the system uses eye-to-eye mount cylinders. To check for proper fitment: Turn your wheels to full lock in both directions, and measure the one cylinder that is extended and the other one that is collapsed in each direction. If the measurement is 23.68" or less at fully extended and 14.62" or more collapsed this product will work with your vehicle. NOTE: We highly suggest you measure your cylinders prior to the purchase of these replacements. These cylinders are intended to be used in dual applications only.
Roaddogg
Reviewed in the United States on August 13, 2024
Just what i needed no more shaking
annonymous
Reviewed in the United States on June 17, 2024
ordered this for f250 superduty, when it arrived it had 2 shocks and a bag of metal bushings. I called superlift and they said that is all that comes with this package because it is for trucks that already had this model of steering dampeners on it. If you already have this on your truck and just need replacement shocks, this is for you.
R hernandez
Reviewed in the United States on May 1, 2024
Great shocks for my ram 2500 a little pricey but you get what you pay for
tvandyck7
Reviewed in the United States on May 17, 2023
Perfect replacement for an older 4” Superlift system. Definitely holds the steering much better.
Travis
Reviewed in the United States on August 27, 2021
Arrived quickly and packaged nice. But there was no included hardware. Had to make new bushing incerts since old ones where failed due to rust.
Lorie Ries
Reviewed in the United States on April 29, 2021
Perfect fit. Helps alot. Replaced the old rough county's I originally installed. 2005 superduty.
Customer
Reviewed in the United States on April 13, 2021
Got these today .Were pretty easy to install .Worst part was getting the metal sleeve into the rubber on the one end .I used oil and a vice to get them in.Made a big difference in the steering.Glad i bought.
SL
Reviewed in the United States on April 15, 2020
Installed on a 2004 F250 with a dual steering stabilizer setup. I contacted Bilstein and apparently they dont make steering stabilizers. Superlift takes 5100 shocks and valves them to 50/50 for steering. These had 16mm eyes on both ends, which is just what I needed. Works great. Easy install. Bilstein quality.
Recommended Products