Your cart is empty.
Your cart is empty. See what customers have said:
1. I had severe handle bar slippage on my 2014 SGS, I bought this and the way it just digs into the bars to prevent them from slipping is awesome.
2. Perfect size! I have needed this for a long time. I have been tightening slipping handlebar clamps on my FLHTC for years. Really let me clamp my apes down very well. Definitely the upgrade from the old two piece riser clamps you want for taller bars.
3. Installed on my 2008 for Harley Sportster. Item worked perfectly to get rid of factory top clamp with built in speedometer and indicators. Holds bars tight, and has set screws to lock bars in if you are running taller handle bars like Apes.
4. It will work as long as your bars drop down to 1" in the clamping area. I installed it on a 1997 softail with 16" apes and it worked good. I drilled little dimples in the bars where the 3 set screws hit the bars for extra holding power.
5. Glad I replaced the stock clamp on my 2019 Street Glide when I replaced the handle bars. Look into replacing your riser bushings at the same time. The extra set screws really help secure the new bars to the clamp. Lighter weight but held better than stock.
6. Worked perfect on my 2005 Road King with 22inch bars. My bars are finally locked down tight and don't move at all. I wish I would have found this product sooner.
7. This was the perfect fix to prevent my new 16" apes from moving. My 03 CVO Road King came with two piece risers, I think 07 and up came with one piece. The two piece risers just wouldn't hold the bars regardless of how tight you secure the screws. I ordered this top cap and once I got the bars in the position that I could use my windshield I ran the 3 set screws into the bar and it was all finished. with the windshield off obviously is when the greatest pressure is on you to pull back and that's when my bars were moving. I rode a couple of hundred miles like that to test it and they were still rock solid.
MICHAEL BRYANT
Reviewed in the United States on July 21, 2021
Fitted to my road king with 16" ape hangers, no issues, great fit and no movement on bars.
DP
Reviewed in the United States on May 5, 2021
Delivery was acceptably quick, ordered Friday and got to me on Sunday! Fitment was just right, exactly what I needed to fix my problem.
Andrew Risso
Reviewed in the United States on October 24, 2021
I just installed 18" Apes on a 1 1/4" riser, (didn't know the bars would have a 1" center). Ordered this top clamp and it worked as described. Locked the bars in place with no movement on my 1996 Road King.
Doug
Reviewed in the United States on April 26, 2021
Was having real issues with my apes on my street glide slipping. This product works like a champ so far. Be forewarned if you have a street glide, it is a real pain to put on. Just because of all the fairings having to be removed. Inner and outer.
Tracy
Reviewed in the United States on August 1, 2020
Worked perfect on my '99 Electra Glide. Replaced the old two piece clamps when I put mini apes on. The set screws really dig in to prevent movement. Only thing I wish there was a cheaper unfinished version for baggers since you dont see it. I highly recommend replacing the riser bushings with polyurethane ones while you have access, combined with this clamp it makes a hugh difference.
Terrence R.
Reviewed in the United States on June 18, 2020
Nice heavy part, finish looks better than in photo, installed on '05 FLHRSI without problems. A necessary upgrade if you have a Harley with the two piece bar clamps and are upgrading to bars with holes for internal wiring, which are a little weaker in the middle and need the one piece top clamp for rigidity.
Dan C
Reviewed in the United States on March 14, 2020
This is a must when installing tall handlebars on any harley. This clamp is for 1 1/4" handlebars with 1" at the risers. If you have stock handlebars from 2000-2013 you have 1" handlebars.The neat thing about this clamp is that it has 3 set screws to tighten after your handlebars are where you want them for the final torque down. Make sure if you go higher than 10-12" on bars that you have a solid clamp like this with set screws.There's a lot more pressure pulling back the higher you go. This is the best clamp I've ever seen.
J and R
Reviewed in the United States on June 12, 2018
Perfect size, really let me clamp my apes down very well. Definitely the upgrade from the old two piece riser clamps you want for taller handlebars. Look into replacing your riser bushings at the same time.
Recommended Products
