Your cart is empty.
Your cart is empty.Rev-A-Shelf’s pullout belt/scarf organizer features 5 hooks. It has a fully accessible telescoping rod with clear non-slip soft PVC coated hooks. It was designed for 12” and 14” depth closet panels. It features adjustable mounting brackets for mounting capabilities in various system hole applications and install easily with two Euro screws.
Customer
Reviewed in the United States on February 26, 2023
Can be installed on the right or left and it pulls out.
Holly
Reviewed in the United States on January 1, 2020
Works as expected. Keeps closet organized.
Ken Behm Jr
Reviewed in the United States on August 31, 2019
We upgraded our walk in closet with this and couldn’t be happier! See also their tie rack and valet. Must haves!
Brent Johnson
Reviewed in the United States on December 7, 2017
As described.
Bezosenabler
Reviewed in the United States on March 27, 2013
Matches the CVL-12-ORB 12" valet rod if you need to complete the set.I got these along with the above valet rod to put the final touches on a closet project and am very pleased. I have 2 installed one above the other. The top is for ties and the bottom is for belts.Sigh, made in China....But the quality is very good: heavyweight metal, very durable, should withstand a lifetime's use. The curved hooks have a very nice, thick non slip rubber/vinyl finish applied to hold your belts, ties, or scarves in place and keep them from sliding around or falling off...very nice touch. They look great installed and add that extra organizational touch that will make your closet more functional and neat.Installation is a snap: Install the 2 support mounts, slide the assembly in, tighten the assembly into the mounts and done. TIP: I painter taped the supports to the assembly, leveled it, and marked where I needed to drill.Minor quibble (and with the valet rod also): If you zoom in and look closely, you'll see some white plastic above the 1st 2 belts in the photo. This is a cosmetic eyesore. But it's also one of the reasons this the least expensive valet you'll find. The plastic insert allows the assembly to slide in/out and is cheaper than ball bearings. TIP: I used an indelible black marker to "paint" over the exposed parts of this plastic slide prior to installation.Even if you don't do this, I would highly recommend this piece of hardware.
Recommended Products
