Your cart is empty.
Your cart is empty.Product Description
Light weight, high strength
6 holes internal routing. Internal routing to protect brake lines and reduce daily wear, reduce the occurrence of accidents, and provide you with safer travel;
Ergonomic design, easy to install and remove
Integrated design handlebar for the competition that installation and removal steps easy, very suitable for competition use.
Useful Practise of Internal Cable Installation
1. Get about a foot length of nylon tubing 2 or 3 mm in diameter. Poke it through the elongated hole nearest the center and look for the end of it at the other hole. Grab it with a pair of needle nose pliers and pull it through. Then thread the cable through and slide off the nylon tubing.
2. Using the cable as a guide, slide the brake outer sleeve on, again from the center hole. Pull the cable tight so the end of the sleeve was up against the inside of the hole and with a small screwdriver under the cable, levered it up so the sleeve aligned with the whole then pulled it through.
Friendly Reminder
1,Install the product correctly, please follow the specified tightening torque (4Nm).
2,Tighten the screws. Since the road bike handlebar is made of carbon, we recommend tightening the body to support it by tightening with your hands. Cracks can occur when strong tensions occur.
3,Any quality problems with our carbon handlebar please send us messages, we will try our best to help you.
4,Wish you a happy cycling and good luck!
Alfred Biton
Reviewed in the United States on May 15, 2024
VERY NICE
tony
Reviewed in the United States on August 9, 2023
The media could not be loaded.
José G.
Reviewed in the United States on August 3, 2023
Es lo que estaba buscando.
Mario Munevar
Reviewed in the United States on April 22, 2022
Es el tercero que compro. El primero en amazon. la marca RXL SL me genera confianza. Este lo compre para reemplazar el anterior que se rompio por un grave accidente donde me rompi tambien varios huesos hace 3 meses. Se rompio al recibir un fuerte impacto contra otros ciclistas, no por defecto de fabricacion. Ya lo instale y he rodado 400 km nuevamente. Los anteriores en otras bicicletas llevan mas de 20.000 km a un nivel competitivo y agresivo. Me sorprendio el sobrepeso encontrado en este ultimo manubrio. 344grs contra 320grs en los anteriores, todos 400x100 con el mismo acabado. la logistica, empaque y envio fueron rapidos como siempre via Amazon, entregado en Bogota por PasareX.
BBG
Reviewed in the United States on June 29, 2021
They were perfit for my bike.
Priscilla
Reviewed in the United States on February 28, 2021
The bars came in three days and were in excellent shape. I love them.
M and J Gordon
Reviewed in the United States on January 30, 2021
Bought these bars for a retro Colnago project. I think they look great, are fairly comfortable, and a great value. Mike bike with all newer groupset and parts came in at 19 lbs. Of course I had to use a shim since my bike had a 1 inch headset. My only issue. Running the cables internally with standard Shimano cables and sleeves bind just a little bit. I need to figure out some better cables for it that will wrap around the bars and not bind. I mean they work still but the brakes are a tad sluggish to pop back.
Harris Family
Reviewed in the United States on April 30, 2021
I loved the one piece design however with that come significant disadvantages. The overall shape is really unconfortable. The flat part of the bar are angled downward so your wrists are forced to bend excessively. Perhaps if you run more of a touring fit it may be better however since there is no flare that seems like a bad use. They are not heavy but not light. They look pretty good but mine showed up with a razor mark all the way accross the top. Superficial but its there.
Recommended Products
$29.95
$ 12 .99 $12.99