Your cart is empty.
Your cart is empty.SABRENT SA-IDE88 3-Port Serial ATA (SATA) (1 External eSata port + 2 Internal Sata Ports) + 1 IDE/PATA 133 port RAID PCI Controller Card This PCI Host Adapter can upgrade your desktop computer to have dual Serial ATA Channels. 3 Serial ATA port (two internal and one external) and one ULTRA ATA IDE 133 port (internal) Ultra ATA port Supports up to four hard drives Breaks the 137GB capacity Specifications: SATA/150 & Ultra ATA/133 Combo Card Ultimate SATA speed: Up to 150 MB/s 2 SATA ports and one Ultra ATA port Supports up to four hard drives. Fix PCI bus version2.2 3 Serial ATA port (two internal and one external) and one IDE 133 port (internal) IDE port support ATA-33, ATA-66, ATA100, ATA133, ATA/ATAPI-7 spec. Speed can up to 133Mbps Compliant with Serial ATA 1.0 Specification Supports two independent Serial ATA ports with data transfer, rate up to 1.5 Gb/s Option IDE interface can driver two 133M IDE HDD/CD ROM /DVD/DVD RW. IDE port support ATA-33, ATA-66, ATA100, ATA133, ATA/ATAPI-7 spec. Speed can up to 133Mbps Plug & Play 3 Ports SATA supports RAID 1/0 0+1, and PIO mode 4/3/2/1/0 Extension to UltraDMA-133 interface for up to 133MB/sec transfer rate Complies with ATA/ATAPI-6 Support 24 bit hard disk mode >137MB Supports two independent Serial ATA ports with data transfer rate up to 1.5Gb/s. Supports ATA PIO mode 4, multi-word DMA-mode 2 drives and UltraDMA- mode 6 Serial ATA ( SATA ) Host Controller chip with 32-bit interfacing Built-in 256 byte FIFO per port for fast read/write operations PCI interrupt sharing and coexists with main board IDE controller Redefined Bus Master Programming Interface for IDE controllers to support up to four bus masters in a single function Supports RAID function 0 and 1 Adjustable stripe size for RAID 0 Supports co-exist RAID SET AND Non-RAID HDD Allow HDDs with different sizes to be configured in a RAID set Requirements: Microsoft Windows 98SE/ME/2000/XP
MrPete
Reviewed in the United States on February 11, 2008
While this card may work well in some older machines, the given description is inaccurate and insufficient.1) It is a two-port (not three-port) card. The external port is wired in parallel with one of the internal ports.2) It is not really an eSATA card. Yes, the external port has an eSATA connection. But the chipset does not properly support eSATA (hot insert and remove) protocol. If your external drive will always be attached, this card may work for you.3) It is not able to function in even five-year old PCI computers. After much pain, we were told the card requires its own interrupt (IRQ). The vast majority of PC's today share IRQ's across all PCI slots. None of our current computers could be configured to work with this card.If I had known any of these things ahead of time, I would have bought something different.
Thingsextreme
Reviewed in the United States on November 4, 2008
I bought this card to update my computer. It wasn't recognized by the computer so I contacted support. It took 5-6 days for support to reply (they post a 48 hour max for contact support). They gave me advice that didn't work and when I contacted them again, I still haven't received a reply (going on two weeks).I honestly can't say if it works or not.I won't buy from this company again.
Recommended Products
