Your cart is empty.
Your cart is empty.Product Description
- Ends: 1/2″ Sq.
- Height: 44″
- Pairs with: All 1/2″ Sq. balusters
- Shoes: HFSTB16.3.19, HFSTB16.3.2
The Twist and Basket series has quickly become the industry standard in staircase remodel and new staircase constructions. Not only are they highly attractive, they are also very affordable. Combine some scrolls with this design and you can easily create a beautiful staircase that will be admired by all.
These balusters are solid wrought iron and are 1/2" square. They use the shoes for the half-inch balusters HFSTB16.3.19 and HFSTB16.3.2. Also, pair with all other half-inch products.
House of Forgings brand iron balusters are known for being the highest quality balusters with the best powder coated and custom faux finishes.
How to Replace Wood Balusters with Iron Balusters
Step 1 – Preparing the work area
Cover all work areas, furniture and decor to protect from the sawdust that will be created when cutting the wood balusters.
Step 2 – Cutting Old Balusters
Using the Reciprocating Saw or Jig Saw, cut the wood balusters in half.
Step 3 – Remove Old Balusters
Once cut, remove the balusters by slowly pushing them back for forth until the nails are worked loose. If nails are left hanging out, use the pliers to wiggle them out.
Step 4 – Drilling Holes
*This applies if you don’t already have holes from your wooden balusters.
Drill an appropriate size hole for your balusters top and bottom. (If you don’t want to use shoes to hide leftover gaps with square balusters, you can use a mortising bit and punch out a square hole instead.)
Drill 1" to 1.5" deep up into the handrail. Drill 1/4" to 1/2" into the tread / floor. (Use your best judgement as you should know the material you are installing into.)
Step 5 – Cutting Iron Balusters to Size
Measure and cut your balusters 3/4" longer than the distance from the bottom of the handrail to the top of the base (tread/floor). This gives you enough room to slide the baluster up into the rail and then drop it down into the hole. A Portaband saw or chop saw with metal cutting blade are the best methods to cut wrought iron balusters.
Depending on where you want your pattern to line up, you may cut all from one side or cut some from both sides.
Step 6 – Insert Iron Balusters
If you are using shoes, Add them in step 7 and then insert the iron balusters into the holes.
Slide your balusters into place. Make sure your pattern is correct and everything lines up.
Step 7 – Base Shoes
If using shoes, slide your shoes on now. Apply about a dime size drop of epoxy in the top and bottom holes. After the epoxy has dried, slide the shoes into place and epoxy them as well with just a little dab. Alternatively, if your shoes have set screws, you can tighten the screw at this point. Allow up to 24 hours for the epoxy to fully dry.
(We recommend always using epoxy for the shoes, as on some hammered.
Iron baluster installation requires one EPC-101 epoxy dispenser, and then one tube of EPC-410 epoxy for every 15 balusters. This assumes you use a dime size drop top and bottom.
Nik Le
Reviewed in the United States on May 1, 2024
The iron balusters arrived in great condition and were exactly as expected. They were solid and felt so much better than hollow core. The seller was so quick to respond on delivery and working with me to get the correct amt of balusters
Tony
Reviewed in the United States on December 25, 2024
Arrived on time undamaged and packaged well. Upgraded stair case spindles with this product and really came out well.
IWHG
Reviewed in the United States on September 14, 2021
These are solid and real. I took mines to a black-smith and was able to get 10 custom handles for my stair rails. Will add pics later if allowed. These is easily probably the best deal online anywhere.
W. Fitch
Reviewed in the United States on July 31, 2020
These are solid balusters, and I'm happy with their structural integrity.However, the black finish, while fairly thick, tends to rub off at the corners exposing the metal beneath it.I'm not sure if this happens in transit, or if they leave the warehouse that way.Since I only observed the damage on the twisted portions of the balusters, the less ornate options offered by this manufacturer may arrive in better shape.
Brian Partch
Reviewed in the United States on February 19, 2020
Used this for a DIY cabinet.
Patrick
Reviewed in the United States on August 21, 2016
High quality, solid iron
Eugenia M.
Reviewed in the United States on December 15, 2016
Love love love them good quality
Customer
Reviewed in the United States on November 16, 2015
Item was perfect. Real metalTiming perfectThank you so much
Recommended Products
$29.20
$ 15 .99 $15.99