Your cart is empty.
Your cart is empty.Schaller Oyster S/S (single/socket) Piezo-Pickup 1 Oyster Piezopickup with socket for interior mounting. Our Oyster pickups give your instrument a natural, warm, full sound instantly, without active switching or preamps. The outstanding sound is realized through the perfect interplay of three elements, the membrane, the piezo and a special high-quality plastic contact gel. All Oyster models are fixed to the instrument either with double sided adhesive tape or alternatively, with removable adhesive pads which do not damage the surface of the instrument. Cable lengths: 45 cm Thin adhesive tape is recommended for guitars that are quite resonant. If however, very loud signal strength is required, an adhesive silicone rubber pad is preferable. Instructions: Cut a 2cm piece of double sided adhesive silicone rubber pad or tape, remove the protective foil and stick it to the underside of the pickup, then stick the pickup onto the guitar. Finished! With a high-quality 1/4" jack socket including cable strain relief, screw nozzle and strap button. Professional quality, secure mounting and perfect shielding make the Oyster pickup all the more valuable! Our Oyster pickups have a capacity of 74 pF. We recommend a minimum output impedance of 1 (to 5) MOhm. In principle you can use our Oyster for all different kinds of instruments. The sound depends on the position at your instrument, please try! Weight: 46g Includes: 1 adhesive tape.