Your cart is empty.
Your cart is empty.SG53908 Features: -Schrader valve test adapter. -For GM and Chrysler. Product Type: -Pipe. Dimensions: Overall Product Weight: -0.15 Pounds.
Rigo
Reviewed in the United States on November 18, 2024
Very good product thank you very much
Neil B
Reviewed in the United States on July 2, 2021
Fits my Orion Fuel Pressure Tester bought on Amazon...httpss://www.amazon.com/gp/aw/d/B08FCH1188?psc=1&ref=ppx_pop_mob_b_asin_titleRight thread for the fuel rail test connection on standard GMs, Saturn's, etc. (7/16"-20, NF)Does not depress the Schrader valve in the fuel rail test connection. In the attached picture you can see there is nothing to push down the Schrader pin (compare to a tire pressure gauge).So you have to bleed off the fuel pressure and then remove the Schrader valve on the car to test.
E.G.
Reviewed in the United States on July 19, 2021
NOT A COMPLETE TOOL...IT DOES NOT HAVE THE SPRING THAT PUSHES ON THE THE FUEL RAILS SCHRADER VALVE TO ALLOW FUEL TO ENTER THE ADAPTER...THEY SHOULD INCLUDE OR STATE THAT. CRAPPY
Brian
Reviewed in the United States on July 18, 2021
Hooked this to 2 different fuel rails. Pressures read ok but when I tested volume there was very little flow. Tried another 1 from someone else and the volume was fine. Found inside the fitring theres a rubber washer and a bent metal piece that pushes in the schrader valve on the fuel rail. That metal piece was very bent. I had to salvage and modify 1 from an old adapter. Now this works just fine.
gail taylor
Reviewed in the United States on October 2, 2017
As advertised.
Dobe
Reviewed in the United States on June 5, 2016
Nothing wrong with product except it is not a large schrader, will not fit a GM car. This is a standard schrader.
John
Reviewed in the United States on February 11, 2015
I thought I'd upload a couple of better photos for this item, in case it helps somebody out. The quick connect male fitting (gauge end) is made of steel and has a one way valve in it. While I believe this is the most popular version of quick connect fitting for fuel pressure gauges, my ABW gauge (made in USA) accepts slightly differently shaped fittings (brass, no valve, slightly shorter). The other end of course, is designed to correspond with a standard large Shrader valve fitting found on the fuel rail of certain cars (GM and others).
RW
Reviewed in the United States on October 23, 2015
Fair price, quick ship product as described no problems THANKS
Recommended Products
$73.07
$ 33 .99 $33.99