Your cart is empty.
Your cart is empty.Softride springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride springs use bolt style spring clips, eliminating friction. Other spring designs use the cinch style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker Softride springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Sam mcintyre
Reviewed in the United States on January 26, 2022
Ultimately used these springs as a lift kit for my 72 Jeep j4000 pickup. They seem to be well made. They don’t come with bushings if that matters to anybody but I didn’t care Bc I cut the eyes off them
Richard L. Sleeper
Reviewed in the United States on April 6, 2019
Skyjacker makes great parts. Springs arrived as expected and are clearly superior to the Rough Country springs we currently have. One star deducted for the shims not coming with the springs. You will need a 4 degree shim to adjust your front driveshaft angle. The picture shows shim and bushings, but neither come with the package.
Recommended Products
