Your cart is empty.
Your cart is empty.Our kits are precision computer pre-cut and are made with a high performance translucent softened PVC film with UV-stabilizers & gloss surface with adhesive backing. The material are applied in a manner similar to vinyl stickers/graphics. It will enhance the appearance of your vehicle, and will not crack, yellow, shrink or peel over time. This kit is design to be permanent, but can be remove at anytime without damaging your lights. This film is made to withstand any weather condition, high speed, debris, and pressured car washes. When comparing to taking your lights apart and painting the inside which will lead to uneven color, the old fashioned clip-on/double side tape that are easily stolen, and is much more troublesome and permanent. The static cling style, with moisture, will crack and eventually fall off. This is a much better alternative. It is a simple and easy method without having to spend hundreds on modification. Install the pre-cut overlays over the exterior of the light. The light does NOT need to be removed in order to install this. Installation instructions are included.
Brock McKenna
Reviewed in the United States on January 26, 2025
Like the instructions say, take your time. I spent probably 20-30 minutes getting mine perfectly centered and after a few runs with the heat gun they sealed flawlessly. Amazing price for what you get if you're trying to go for that murdered black look
Amarie
Reviewed in the United States on August 1, 2024
These were horrible and if I could give them 0 stars I would. Installed and then after one drive every bug, road particle you name it was stuck to the outside. Took them off washed and reapplied and the same thing. Don't waste your money
Linda
Reviewed in the United States on May 8, 2024
Looks great and wasn't to bad once I had it on
Zion Walker
Reviewed in the United States on October 28, 2024
Perfect fit, better look.Does make it a tad bit harder to see HALO ligts but that should be expected if you’re going to tint the lights that help you see… 20% if you want a more noticeable tint. 35% if you want to have tint but still want to see the same as stock. (I’ve had both)
Bridget
Reviewed in the United States on April 16, 2024
I was nervous because the instructions said to use heat to seal them. Well I didn’t because my car is wrapped and didn’t want to destroy it. Wet them, installed and smoothed out with an old card, and let the car sit overnight. I recommend.
William Cordero
Reviewed in the United States on September 12, 2023
Perfect fit, perfect darkness, mines are the 20. Easy installation. This is one on and the other with out it.
Marc
Reviewed in the United States on June 5, 2023
The film quality was 10 of 10 as well as the pre cut size. The film was easy to apply and came out fantastic! I would've given 5 stars but the advertised darkness was misleading. I would say if you're buying this product go for it! just don't waste your time with the 35% and buy the 20%. 35% is close to having nothing as seen in the picture provided. Driver side is no tint passenger is 35%.
DJ The Warrior
Reviewed in the United States on November 4, 2023
The fit scared me at first. It didn't look like it was gonna cover the illuminated part of the light. Use a spray bottle with 20% soap, 80% water. Spray the sticky side as you unpeel the backing. Spray the outside too, before you put it on the car. This way, if you make a mistake, and the sides touch, its easier to get them back apart. I was patient, and turned on the lights for the install. Alot of pulling back and forth. Remember to pull the top skinny part straight on the light, left to right. Use an old gift card, and definitely use a hair dryer for the troublesome bubbles, but keep the outside wet. Drag the card at a 45° angle or so, dont use it at a 90° angle its easier to work it. Trim the unused remainder after it dries, I did it the next day. I didn't put the blade on the light, but I angled the razor to the outside of the light, and moved it along as I pulled away the extra tint. Do yourself a favor, and buy a brand new disposable razor blade. Its tricky, but it came out good!First two pics are without.
Recommended Products
