Your cart is empty.
Your cart is empty. 1, Standard D-SUB male or female header connector. Connector to screw terminal 1:1 connects for per line.
2, Rated voltage: 60V. Rated current: 1Amp / per pin. Operating Temperature: -20C to 50C
3, Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2, steel, Cr3+ Zn plated. Torque - 0.2Nm (1.7Lb-In.). Pin header and Cage - Brass.
4, FR-4 fiber glass PCB, dual copper layers.
MR PETER F TOWNSEND
Reviewed in the United Kingdom on February 27, 2023
This was quickly delivered and very well packaged. It is a high quality product and very well constructed. Works perfectly.
Mike Q.
Reviewed in the United States on August 21, 2021
The DB37 right angle connector worked great. The only problem that I found with it was once you populate the upper screw terminals, it's difficult to do much with the lower ones. You should populate the lowers first, then move to the uppers. Then if you need to revisit the lower terminals, you'll probably need to remove the upper ones first.
Luke Zorich
Reviewed in the United States on November 10, 2020
It worked fine, but I had to remove the studs and replace them with screws to make it fit onto the db26 card.
Recommended Products
