Your cart is empty.
Your cart is empty.This 63/37 leaded rosin core solder wire is manufactured by AIM Solder, one of the leading solder manufacturer in the world for electronics and industrial applications. This 63% tin and 37% solder wire is an electrical repair solder wire cored with 2% rosin flux and a diameter of 0.032" / 0.8mm.
Terry Monroe
Reviewed in the United States on February 14, 2025
This solder worked very well for wiring of my guitars. Great value.
Sean Mahnken
Reviewed in the United States on January 26, 2025
I don't know who made the decision to put a sticker directly on the solder, but it was a bad idea. I think they were trying to hold the end of the solder in place on the roll, but solder holds its shape anyway. The whole roll was also shrink wrapped.I'll revise my review if I figure out an easy way to get the sticker residue off, but... Really?
Muy satisfecho
Reviewed in the United States on April 6, 2025
Fue excelente
Rene Chabannes
Reviewed in the United States on September 26, 2024
Just what you need for surface mount parts.
Brian from Ohio
Reviewed in the United States on July 24, 2024
Thsi is the best solder on the market
J&K
Reviewed in the United States on June 18, 2024
Seems to be good soldering wire it seems like it work alot better than the stuff I had b4 I thought I needed a new soldering gun but so far this is working great. I mainly use it for rc cars an stuff. And I'd definitely recommend it!
jimb1972
Reviewed in the United States on November 1, 2024
It sticks electronic parts together, flows nice.
A. B.
Reviewed in the United States on January 28, 2024
This is a medium sized roll of classic rosin core leaded solder. This solder isn't used commonly in commercial applications anymore, because everyone has switched to RoHS (Reduction of Hazardous Substances) lead-free formulations. But sometimes you need to make repairs to vintage electronics or old projects without mixing solder types, and this is great for that purpose. The .032" diameter is a good medium size to stock that's appropriate for small electronics work while still being usable for larger soldering if you need to work on bigger projects.Leaded solder comes in two formulations, 60/40 and 63/37. I far, far prefer 63/37: that alloy is 'eutectic', which means it goes immediately between liquid and solid, melting and solidifying at the same temperature. That makes it much more predictable and reliable to work with. If you have the choice, I definitely recommend you choose this formula instead of 60/40.AIM is a very reliable manufacturer of solder and I've used their products for years. Once upon a time, I would have said that beginners in soldering should stick with leaded solder like this product because it's easier to work with, but I've changed my opinion - a lead-free formulation called SN100C is available from AIM that's also an eutectic alloy and just as easy to work with as classic leaded formulations. So if you're just looking for generic solder to keep on hand, consider splurging for SN100C to keep yourself safe from lead while doing hobby or small-batch production work. But if you need leaded, this works well.
Customer
Reviewed in Canada on April 26, 2024
I've purchased my fair share of much less expensive solder; some was ok and some I abandoned after using just a few times. I no longer gamble on the quality of the solder purchased and stick to brands like Aim, Kester, or MG. I like the 63/37 a little better than the old standby 60/40 because the 63/37 is eutectic, meaning it solidifies very quickly without going through that "slush" stage that 60/40 goes through when it starts to solidify. You get better solder joints because there's less chance of the parts moving around while the solder is cooling, which can result in a poor solder joint.
Recommended Products
$9.92
$ 4 .99 $4.99