Your cart is empty.
Your cart is empty.Product Description
BEEYUIHF Lead Free Rosin Solder Flux Paste for Electronics soldering #7142
Use rosin flux paste to remove the oxidized layer on the surface of the material and increase the success of soldering. Additionally, rosin flux helps tin to increase its wettability and increase the robustness of the solder. Rosin flux is an essential soldering product.
Solder paste for electronics Insulation - Non-Conductive - Increases Fluidity
The role of rosin flux is to reduce the oxidized solder to ensure the fluidity of the solder, rosin will be oxidized or evaporated during the soldering process, and will not affect the conductivity. Tin can be automatically returned to the place of soldering to ensure the integrity of the solder.
#7142 Flux Paste - Medium Viscosity
Warn: Please keep out of the reach of children ! ! !
How to use the solder paste flux: Please apply the solder flux paste on the pins of the components that need to be soldered, and then solder directly with a soldering tips, this is the best way to solder, which can maximize the activation of the flux activity and wettability, and improve the quality of soldering. After soldering, rosin flux can form a protective film on the surface of the components, and will not corrode the circuit board and components.
Application of Soldering Paste Flux in Repair:
Apply flux evenly to the pins
flux for soldering helps to separate and evenly tin the pins, making them shiny and full.Excellent wettability, non-conductive, non-sticky residue.
Electronic Flux Paste
Non-corrosive to ICs and PCBs, easy to solder, quick to clean. Rosin has a low corrosivity, is neutral and does not corrode circuit components.
BGA solder and repair
The role of flux in BGA soldering: Removal of oxides "and" reduction of surface tension of the material to be soldered
halogen-free, acid-free
Halogen-free soldering flux paste. Moderate viscosity, ideal for soldering wires, removes metal oxide film and increases tin wettability.
Halogen-free and acid-free, does not corrode components and circuit boards.
Flux paste viscosity moderate, flux is a solder alloy wetting agent, can be contained within the surfactant, increase the wetting of tin, in order to promote the flow of solder, improve the quality of soldering, increase the brightness and firmness of the solder joints.
Solder paste flux No deterioration, good immersion, good insulation
Solder Flux Paste for Electronics: suitable for soldering Iron Tip Cleaning, soldering, mobile phone, BGA repair, SMD soldering and repair, PC card and other precision electronic chip-level flux soldering. Have strong oxide removal effect to gold-copper alloy substrate and wire.
Bruce C
Reviewed in the United States on February 26, 2025
GOOD STUFF....YOU NEED THIS FOR DIFFICULT TO SOLDER OLDER WIRING
Daniel
Reviewed in the United States on February 16, 2025
Great product, I looked for a good flux for a long time. Many of them didn't work out for me. But this product is exactly what I need. I solder MANY MANY wires in an automotive shop. Great product for wiring harnesses. And overall soldering
Alexander A.
Reviewed in the United States on February 11, 2025
Lo use y quede con dudas
Chris
Reviewed in the United States on September 20, 2024
Very happy with this product
heather s
Reviewed in the United States on July 24, 2024
Like the title says idk much about flux as I'm just learning however I use to use flux for copper water pipe but that was 20yrs ago.It's very sticky, hard to use a brush, can't use a qtip but seems to work . There's a lot here
soccer
Reviewed in the United States on October 17, 2024
I am a beginner when it comes to solder mostly fixing solder breaks on electrical boards for my kids, occasionally patching in a jumper to go around a burned out a PCB path. I wanted to start using resin to help the solder flow and stick better then just heat (after all, all the folks on you tube use it). I had some success with resin, but it seemed liked I used a lot and the solder was not as smooth as I thought and was hard to get on the actual piece. I suspect it is not the resins fault but my fault for not knowing what I am doing. Overall, I am very happy with the Resin.
Charlie
Reviewed in the United States on October 16, 2024
This paste works as it should.
912Bigred
Reviewed in the United States on October 11, 2024
This solder flux paste works really well! I've been using it for some electronics repair projects, and it definitely makes soldering easier. It helps the solder flow smoothly and creates strong, clean connections. The paste is a good consistency and easy to work with. It cleans up easily too, which is a plus. The container is a good size and will last me for a while. I'm not a professional, but this flux seems to be just as good as the higher end brands. I'm really happy with it.
Recommended Products