Your cart is empty.
Your cart is empty. Performance characteristics
The welding gun is designed with lightweight mechanism and easier to work. To achieve single hand welding,
easier to finish. Welding operation. Adopt heat resistant fuselage.
Stainless steel housing and long life alloy welding Tsui. The diameter of tin wire can be 0.8-1.2mm.
Usage method:
1.Press down the tin inlet, lnsert the solder wire from the tin inlet,
and buckle the plate,machine until the tin wire is sent to the tin guide pipe.
2.connect the solder gun to the power supply, turn on the power switch and preheat.
3.when the soldering gun is heated to enough heat, the welding machine can be operated by pulling the trigger.
4.when the tin wire is withdrawn, the tin inlet is pressed, and the tin wire is drawn at the same time.
5.To replace the heating core, first remove the window, remove the connecting wire of the heating core,
and then remove the soldering nozzle, the heating core can be replaced.
Matters needing attention:
1.the temperature of the iron tip and the iron pipe work is as high as 480~600 degrees.
2.when soldering gun work, it is recommended to use special iron rack to prevent scalding and safety.
3.prohibit the use of solder guns in flammable and explosive occasions.
4.forbid putting solder guns in damp places, and put them away from children or children.
5.please do not repair or disassemble the solder gun without authorization.
If parts or wires are damaged, personnel who need to comply with electrical and electrical productsmaintenance can be repaired.
6.when the work is finished, turn off the power of the solder gun and wait until it is completely cooled to the indoor temperature.
Jonathan Moore
Reviewed in the United States on April 18, 2025
Arrived on time and works great 👍🏽
Recommended Products
$25.99
$ 11 .99 $11.99