Your cart is empty.
Your cart is empty.This sale is for a gallon of SS-2000W, white DTM primer and a quart of SMR-222 activator; which yields 5 quarts of spray able DTM primer. SS-2000 is 2.1 voc compliant. - 4:1 Mix for DTM primer - 4:1:1 Mix for DTM sealer (use SMR-0065, SMR-0075 or SMR-0085, sold separately on Ebay) - Great metal adhesion and corrosion protection - Fast dry and easy sanding - Excellent color/gloss holdout and sealing properties
Nick
Reviewed in the United States on September 23, 2024
4/1 with a good amount of reducer, works great.
Customer
Reviewed in the United States on August 10, 2023
Used many SpeedoKote products. Seems strong and sands fairly easy. Would not use as a final sealer because it’s hard not to dry spray it. Tried 3 different guns. Go with epoxy sealer and thin it a little. Just use this for sandable primer if you have some bare metal.
car digg
Reviewed in the United States on April 10, 2023
IT NEEDS MORE BONDING AGENT TO BE ANY GOOD...
Alexander Mier
Reviewed in the United States on April 5, 2021
Are used to Speedokote bright white and jet black on my farm truck restoration project. I also used the white sealer.The paint goes on very nice, it’s very glossy, it’s easy to work with, it fills in minor scratches, it does not run easily if you use the first activator and you follow the steps applying medium wet coats.I’m so happy with this product I’ll be using this paint for my horse trailer, I’ll be painting a small portion of my boat all black, I’m also going to paint my boat trailer.I Used this paint both outside and in my garage using the Eastwood concourse LT 100 paint sprayer.In the end I apply three coats. Are used about a gallon and a half on the full-size truck.
K. Mehrain
Reviewed in the United States on August 10, 2020
you only have 30 min pot life after mixing, if you mixed too much and you have to wait 10 to 14 min flash time between coat, you will lose what is in the spray gun, it starts clogging and thickening that I had such hard time cleaning the spray gun.
Rafael
Reviewed in the United States on February 6, 2020
Loved it covers well super fast even on a very rusty car, very thick stuff super durable and thick build for sure sprayed on very evenly using a 2.0 spray gun tip and slightly reduced with urethane reducer. I was block sanding after 2 coats. Very low VOC sprayed in a non exhaust ventilated building and almost hand no overspray lingering in the air. Smells ok not very harsh but still use a 3M or similar cartridge mask.
William D.
Reviewed in the United States on December 18, 2018
good stuff. ready to paint.
Thomas R. Bentley
Reviewed in the United States on August 26, 2015
Repainted my 2001 F350 color change. This primer is awesome.
Recommended Products
