Your cart is empty.
Your cart is empty.Product Description
The bracket is suitable for the 3.5-inch hard disk position of the ordinary desktop computer mainframe, or any device that can directly fix the 3.5-inch hard disk can use this bracket, and the bracket can be fixed in the main body by using the screw of the fixed 3.5-inch hard disk. The product is not deformed, heat dissipation is fast, and it can protect your hard disk to a large extent.
Support 2.5 inch Hard Drives(SSD and HHD) and Fit all Popular PC Case
1.Adopt precision die stamping forming, good consistency and easy installation
2.SNANSHI 3.5 to 2.5 hard drive adapter compatible with SSD solid state hard disk and ordinary hard disk
3.The hole position is exactly the same as the 3.5 inch hard disk bit, as long as the hard disk can be placed in the position, the shelf can be placed
4.Thick metal profile, no deformation, fast heat dissipation, maximum protection of your hard disk
5.SSD adapter 2.5 to 3.5 support for 2.5" hard drives such as SATA, IDE, or SSD hard drives 2.5 inch (SSD hard disk / HDD hard disk) to 3.5 inch hard disk bracket
6.It is easy to use a notebook hard disk as a desktop hard disk to make
7.Fixed bracket on 3.5 chassis on desktop 2.5 notebook hard disk bracket 2.5 inch
All Screws Include
It is easy to use a notebook hard disk as a desktop hard disk to make
For all 2.5" Hard Drive
Compatible with SSD solid state hard disk and ordinary hard disk
Adopt precision die stamping forming, good consistency and easy installation
The product is not deformed, heat dissipation is fast, and it can protect your hard disk to a large extent.
Abbsy
Reviewed in the United States on May 25, 2025
Very useful for mounting an ssd into a full sized hard drive bay.
Jose Santiago Cruz
Reviewed in the United States on September 3, 2024
The product good and shipping very fast
Perry
Reviewed in the United States on February 28, 2024
All the screw holes lined up perfectly with the SSD and the existing computer tray. All the screws fit the screw holes on the tray and on the new SSDs. No screws missing. They even included a small Phillips screwdriver that fit the eight screws.One thing I did to make the job go smoothly was to take a 3mm thumb screw and hand screw each of the eight holes. This was because a little spray paint got into a couple of the screw holes and the small Phillips and/or the included screw may have become damaged if I did not do the hand screw. If you have a 3mm tap, that would also work to clear the hole perfectly.
ITGUY
Reviewed in the United States on February 23, 2024
There's no reason to buy a more expensive mounting bracket, as this is a complete solution, with mounting screws (2 sets), the actual brackets (2), and a small handy screw driver that can not only be used for securing the SSD to these brackets, but I personally use it to remove the M.2 drives that seem to go bad often with the Dell Optiplex PC's I purchased back in 2019 for my company.I highly recommend these as a cost effective solution. Yes, you can pay more and go for brand name, but it's really not necessary, IMO.
عبدالله
Reviewed in Saudi Arabia on March 24, 2023
رائع
Glenn Porter
Reviewed in the United States on December 19, 2023
This adapter is really very simple. It’s a steel stamping that has mounting holes for the bottom of a 2.5 inch drive and mounting holes to match 3.5 inch drive mounts.The adapter is made of a pretty sturdy gauge of steel and powder coated (I think), so it’s rugged. It allows mounting of a 2.5 inch drive, and provides plenty of contact area and overall area, so it also acts as a good heat sink. 2.5 inch HDDs get hot, and so do 2.5 inch SSDs, so a good heat sink helps the drive last longer.The product comes with two adapters, two sets of mounting screws (4 for the 2.5 inch drive and 4 for a 3.5 inch drive bracket) and as a bonus comes with an appropriately sized cross-point screwdriver.I think this is a really good product, it’s a good value, and it does the job well.
J. Sweeney
Reviewed in the United States on December 9, 2021
They are very basic but they work and the holes lined up almost perfectly. I used these to mount SATA SSDs in the plastic mounts to replace full-size hard drives in some Dell Optiplex PCs. They look kind of cheap in the Amazon pictures but they're actually quite solid. Note they are for one drive and there's no adjustments, but for a single drive replacement they worked perfectly. You have to use screws (two sets are provided with each adapter) to mount the drive, but the holes on the adapter lined up with the existing part from the Dell PC (usually with pins), and I think most of those are pretty similar. And of course there is a second set of screws it you nee them.
Khaled
Reviewed in Saudi Arabia on April 24, 2021
سيئ جدا. عندي هاردسك باراكودا من شركة سيقيت حاولت تركيبه على الحامل لكن الحامل اصغر من الهاردسك.
Customer
Reviewed in Canada on April 13, 2019
not a lot to say here, they're metal brackets.
James Maconachy
Reviewed in the United States on December 4, 2018
This adapter comes with the screws you need to attach the 2.5in drive and it is easy to attach the drive to it. I am installing a 2.5in SSD in a Dell which has a 3.5 HD carrier. My concern is that the adapter should be an inch longer so that the 2.5in drive connectors end up at the same place as those on the 3.5in drive did. The location on the adapter for it to attach as a 3.5in drive are fine. But a 3.5in drive extends out another inch from that point with the electrical/data connectors at the end, the adapter does not account for this additional length of the 3.5in drive. The adapter needs to be an inch longer at the end the 2.5in drive attaches to, thus shifting the electrical/data connectors up to the same location as those on 3.5 in drive. Also the adapter mounts the 2.5in drive in the center of the adapter.It would be good to have holes in the adapter to allow the 2.5in drive to be mounted on the left side, center and right side of the adapter, again to give the best alignment with the existing electrical and data cables. These changes to the adapter would allow placement of the 2.5in drive that would assure it will be able to connect to the existing cables.
angel0405
Reviewed in Canada on November 4, 2018
Overall good quality. Gave me a bit of a headache installing it in a dell computer, which uses pins instead of screws, so I had to enlarge the holes. other than that loved the fact that it came with mounting screws included.
Joshua V.
Reviewed in Canada on November 10, 2018
Bought these to allow mounting of an ssd into a rosewill 4500 4U case. These held the ssd securely and allowed use of the standard 3.5" drive clips
Rick
Reviewed in the United States on August 24, 2017
The tray works OK and is very sturdy. The holes for the SSD drive are perfect. The holes for mounting the tray to the computer is the only slight issue I had. The holes are small (same size as the SSD mounting holes) and the screws that come with the tray work perfect if you are installing in a drive bay that you screw through into the tray. I assume this was all so they only had to supply one size screw in the kit. (8 total). If you have any kind of rail system, the holes are to small for the typical screw size. The rail system I had for the Dell system had a rail that connected to the tray with one screw in the center hole and the other two holes (front and back) had little tabs that would fit inside the typical hole size on a 3.5" drive. The tray being a smaller size the tabs didn't fit into the holes so the rails didn't set completely against the tray causing the tray/rail system not to fit back into the computer. I had to drill out the holes to make everything fit OK. Wasn't a show stopper and I really didn't mind drilling out the holes, just had to take the drive back out of the tray to do the work. If you have rails that have the normal size screws in them, that you can't replace with the smaller screws, you could have an issue.
Recommended Products