Your cart is empty.
Your cart is empty.
Each kit contains all the parts you need to build a great guitar.
- Predrilled and routed body
- Neck with frets and dual-action truss rod installed
- Bridge and turning hardware
- Pickups, Pots, and Wiring Components
- All wood parts are pre-sanded, ready for your final sanding and a finish to be applied.
- Some bodies and/or necks may have binding in place
Specifications
Style: Guitar
Body Wood: Paulownia
Neck Wood: Maple
Fretboard Wood: Rosewood
Neck Joint: Bolt-on
Number of Frets: 21
Pickups: 3 Single Coil
Controls: 1 Volume, 2 Tone
Bridge Type: Tremolo
Hardware Color: Chrome
Truss Rod: Preintalled, Dual Action
Scale Length: 25-1/2 Inches
Nut Width: 1-5/8 Inch
Bridge Width (E to E): 2-1/16 Inches
Difficult Rating: 2/5
Daniel T Fehrer
Reviewed in the United States on November 1, 2024
This kit comes with everything you need to build a unique and playable guitar.The wood looks like a premium cut and choice. The Neck fits well in it's pocket.The outside finish is done good enough that you could just put it all together and be able to use the guitar.If you are like me, and are in it for the long hall, you can spend some time with perfecting the inside of the cutout parts. This wood is great to work with, but in the end grain areas you could take some extra time sealing the open pours in the wood. The finish seems like maybe a 320 grit, so again, really nice.I did contact the seller, (Sam) and he responded within about an hour and was really great at answering all my questions. He made me feel like he was the kind of vendor I would like to do business with again and probably will. The photo barely show the sealing work I have done so far. It is going faster than I expected.The neck was near perfect, leveling wise and just took a couple swipes with the leveling beam. You can see the polished frets in the photo, that took about 4-5 minutes to make like glass. This is in my opinion a good value from a nice vendor...
Recommended Products