Your cart is empty.
Your cart is empty.Product Description
SUPARE Toyota Tacoma Fog Lights 2005-2011 Toyota Tundra Fog Lights 2007-2013
Fitment:
- 2005-2011 Tacoma
- 2007-2013 Tundra
- 2004-2006 Solara
- 2008-2015 Sequoia
Note: Designed to replace original fog lights, mounting bracket not included.
SPECIFICATIONS
- Bulb Type: LED
- Housing Material: PC
- Lens Cover: Toughened PC
- Sealing Material：Silicone
- Rated Power: 15W,1500lumen
- Color Temperature: 5500K and 3000K
- Expected Lifespan of Bulbs: 50000 Hours
- Operating Temperature Range : -40°C (-40°F) - 150°C (302°F)
- Waterproof: IP68 Rating
- PACKAGE INCLUDED
- 2* LED fog lights with halo ring
- 2* adapter extension harness
LIGHTING PATTERNS of SUPARE Toyota Tundra Fog Lights 2007-2013
Fog light
Daytime Running Light
Turn Signal
HIGH QUALITY COMPONENTS
PC lens of toyota tundra fog lights offers high resistance to small impacts like rocks or pebbles.
Durable aluminium alloy housing prevents moisture and dust from entering the housing.
Toyota tacoma fog lights are made out of high-quality material to withstand the most rigorous weather conditions.
EASY INSTALLATION
Plug and play design with 9006 socket direct fit with some vehicle models. We also provide adapter extension harness for other models. (Red wire for stock fog light and black wire for negative). Green wire is for DRL and Blue wire is for turn signal.
Note: These tacoma LED fog lights are a direct fit which uses your factory mounting points in behind the standard front bumper.
ENHANCE DRIVING SAFETY
Tundra fog lights illuminate dark edges of the road where headlights can't. They are used to provide better visibility and safety during rain, fog, snow, or even an excessive amount of dust in the air, so drivers can see well enough to stay on the road and within their lane.
INSTALLATION GUIDE of SUPARE Toyota Tacoma Fog Lights 2005-2011
INSTALLATION STEPS:
- Step 1: Disconnect the factory fog light, and then take a pair of pliers and press down the top and bottom tab on this plastic holder.
- Step 2: Push forward once you have the plastic holder free place, and remove it from your vehicle.
- Step 3: Take off the adjustment screw at the back of the old fog light assembly.
- Step 4: Get your new fog light and install it on your vehicle using the adjustment screw that you removed earlier.
- Step 5: Slip them into the bumper on the vehicle and keep your new fog light assembly securely fixed
- Step 6: Take the fog light plug and connect it to vehicle plug and then test to make sure everything works
Quan
Reviewed in the United States on February 16, 2025
Easy install video on your page from another user! Installed easily in my 2007 Tundra, & looks way better, less weather checked, thank you!
Conrad
Reviewed in the United States on January 25, 2025
Look great and work good
mad_vano
Reviewed in Canada on April 8, 2025
Not the fastest delivery.But packed really good. Will do a review after installation.
B. Swanson
Reviewed in the United States on April 7, 2025
The media could not be loaded.
mikey reyes
Reviewed in the United States on April 11, 2025
I'm going to give 5 stars. not so much for functionality or installation process. but strictly based on appearance. i have the alpha rex LUXX headlights on my 05 tacoma with a custom raptor grilleand these Fog lights look absolutely stunning with this setup. when i use my turn signal my LUXX headlights also turn amber so it's a really nice addition.as for fog light capability... i can't really comment on, as i haven't needed them for any situation yet. vs the factory fogs, there's definitely a difference in appearance. factory's light up everything in front of you vs these, have a focused beam, almost like my LUXXs. it's more of a distinct line across the front so I'm not too sure how much they're affective but honestly, it doesn't matter to me much. i was aiming for look over functionality no question.so that said, great Fog lights imo
Mr. Paul Cohoon
Reviewed in Canada on April 11, 2025
These are absolute garbage. Upon installation they looked and worked great but they are not water proof. Water and condensation gets inside easily and shorts out some of the lights. Instalation was done outside of the 30 day return policy window so I’m out of luck. Save your money !
donna
Reviewed in the United States on July 25, 2024
Supper bright lights for you vehicle. Fit just perfect in my Toyota Tacoma. These are water resistant and good quality made. Great price as well. Very impressive.
Jesus Martinez
Reviewed in the United States on August 12, 2022
The media could not be loaded.
Artie
Reviewed in Canada on April 19, 2022
Pics speak for themselves. They matched my aftermarket headlights perfectly on the 2nd gen. Wired them into the turn signals with no issues but if you don't have any electrical work experience, i HIGHLY recommend you find a good friend that does or take it to the shop. You need to splice into existing cables and use a voltmeter to even figure out which cables you need to cut. I also used a lot of things from my electrical kit to ensure the connection will be reliable like shrinkwrap tubing and clips. The lights did not come with this little stuff that keeps the weather out.Used the lights for a few months now. No problems. Only criticism is that they don't fit 100% perfectly but it's so minor that I hesitate even saying it. There is also a minor delay in the white colour turning on when switching from DLR lights to headlights. Again, super duper minor. 5 stars all the way.
Carey W.
Reviewed in the United States on November 3, 2021
They function well and since my OEM gigs had yellowed over they were not as good as they should. The price was affordable and looked to be bright so I ordered them. They are not as bright as I would like, but they function fine for in the city. The Halo connections on my order were mirrored. The color coding for the driver's side wrong but I figured it out. I love the Halo driving since I have them hooked to my headlights so they turn on when the lights are on. When I use my turn signal the white Halo gets switched to the yellow Halo to be used as an additional turn signal. LOVE it! When you have crappy drivers any additional lights that others can see is well worth it for a safety point. I want people to see the front of my Toyota Tacoma so they know what I am doing and where I am going. The dogs could be brighter, but I will forgive that because of the function of the Halos.
John
Reviewed in the United States on October 20, 2021
Installed these on my 2007 Tundra, they look and perform great!Things to know:1. For the 07 Tundra removing the old fog light was not described well. The retaining clips are on the right and left side and you can insert you hand and release one side and then the other. You will also have to release the retainer for the adjustment screw pressing in on the small clips. Once all three connecting points are free (as well as the wiring plug) the old fog light will slide out to the front.2. The + and - on the new fog light were reversed. You can resolve by turning the connector over and inserting, but there will not be a clip holding it in place. Wasted some time trying to figure out why they wouldn't turn on... The friction is holding fine but recommend electrical tape or a small zip tie.3. I needed additional wire and connectors to connect the orange and white halos. Not much but it was needed.4. Tap into the daytime running light positive wire, I used a volt meter to id the correct wire, and connect to the fog light blue wire.5. I chose to tap into the side marker positive wire, use a volt meter to id the correct wire, and connect to the green wire. You will need to remove the head light fixture to do this, be careful when removing the panel just below the head lights, it is easy to break the insertion pins. I did break them off on one side and used double sided 3M tape to secure when reinstalling, new panels are expensive. And yes the securing push pins will likely break as well so have some on hand. I have aftermarket head lights so the side marker was my best choice. If you can find another wire that provides 12v when the parking lights are turned on that would be a better option.6. The push clips for the wheel well cover that has to be removed will break on an older Tundra. Have spares on hand for when you reinstall.7. Check and adjust the fog light angles with the adjustment screw before installing the wheel well covers. It makes a big difference when they are adjusted correctly.With the wiring connection above the orange halos will be on whenever you only have DRLs (lights turned off) and they will blink in sync with your orange (also DRL) blinkers. This provides an all-orange DRL and blinker configuration during the daytime.When you turn on your parking lights, or head lights, the orange halos go off and the white ones turn on providing an all-white front lighting except when you use your turn signal. The halo will blink orange in sync with your current blinker.Hope this helps with your install.
Recommended Products
$34.72
$ 15 .99 $15.99