Your cart is empty.
Your cart is empty. FEATURES:
This shifter knob not only looks fantastic, touches comfortable but also offers a great control, this classic style car shifter head is a perfect replacement accessory for most automatic or manual transmission vehicles. Also this gear shift head is very easy and quick to install by all drivers even the beginners.
INSTALLATION STEPS:
1. Unscrew the original gear shifter knob to get it off from your shifting rod.
2. Get off the aluminum alloy bottom cover of this shifter head, and put it on the shifting rod.
3. Install the matching threaded adapter of black rubber sleeve on the shifting rod.
4. Screw and tighten the stick shift knob on the shifting rod with small screws by L-shape hexagon wrench.
5. Rotating aluminum bottom cover into the the car shift knob to tighten all up.
TIPS:
* Make sure your original stick shifter removable.
* Not suitable for the original car shifter with its own irremovable lock/function button.
* Not suitable for the reverse gear of original car shifter need to lift up.
* Cannot be installed for those cars with the reverse gear next to the 1st gear.
SPECIFICATION:
▶Color: Black
▶Material: Leather/aluminum alloy
▶Item Dimension:
▶Threaded adapters inner diameter: 0.315", 0.394", 0.472" (caliber M8, M10, M12)
PACKAGE INCLUDESS:
1* Gear shifter knob
3* Threaded adapters
1* L shape hexagon spanner
4* Small screws
Michael
Reviewed in the United States on March 6, 2025
I put mine on a slap stick automatic shift lever. Works good and looks good in charger as long as you can do the minor fabrication on the shaft. Should work great on any manual transmission treaded shaft.
martin valdivia
Reviewed in the United States on April 9, 2025
Good quality, however did not fit my wrangler. I had to make the hole a bit bigger to get it to fit and now it moves so it's a bit annoying.
Hayden Boss
Reviewed in the United States on September 25, 2024
Absolutely love it! So comfortable and fits perfect in my hands way better than stock shifter
Cuddles
Reviewed in the United States on July 21, 2024
Makes shifting easier with a six speed
Nathan Stephanberg
Reviewed in the United States on July 15, 2024
It’s loose after being installed. Goes around the stick freely. Also, it’s too short and my dust cover can’t reach it. Some modifications to it would be good
C. W.
Reviewed in the United States on November 23, 2024
This looks great in my son’s car. He’s updating everything in his Lexus and this is nice
Travis Baker
Reviewed in the United States on August 9, 2023
For me it looks good and sits as high as I wanted on my 01 ranger but the part your hand sits on and the end that screws on broke apart and I had to JB weld them back together for it to work
Cody
Reviewed in the United States on August 31, 2023
Had to put it on a few times for it to snug up. Used tape on the thread at first but removed it and tried again. Snugged right up. Wouldn’t be a bad idea to use red loc-tight or blue to keep it snug. Mine worked out fine without. Looks great and feels right
Recommended Products
