Scott F Blaisdell
Reviewed in the United States on November 27, 2024
Good quality materials. Easy to follow directions.
Jimbo
Reviewed in the United States on August 11, 2020
Not much to say about it. It came with the parts as advertised. Works well except that where the plastic hose connects to the bottle cap it leaks. I'm going to add a small hose clamp.Otherwise, it's just fine.
Brendan W.
Reviewed in the United States on May 31, 2020
As a first-time kegerator owner I scrambled to find a cleaner kit that would arrive quickly when I realized I'd need special equipment. I bought this one because at $30 it was a palatable price, while still being available next-day when many others weren't. It works, but has some flaws: Specifically that the check ball lifter is poorly-constructed and the metal part comes out of the plastic handle while inside the coupler every time, so I have to pull it out with pliers. It also doesn't have a good mechanism for air to flow back into the bottle while you're holding it upside down, so it creates a vacuum and impedes the solution flowing easily - I've been managing by unscrewing the adapter cap slightly to let air in, which seems like a design flaw. The whole kit feels cheaply-constructed, and now that I've experienced this process I'll probably invest more in a better system once it breaks down and needs replacing.Chiefly though, this should not be a $30 kit and I wish I had shopped around. The parts feel so cheap that I told myself the cleaning solution must be expensive to justify the price, but a bigger bag of that was only $6 at my local homebrew store (and the same full kit only $22). I trusted Amazon would have the best prices, which was a mistake on my part. But if you're looking at this product, do yourself a favor and shop around for a few minutes -- you can probably find a better price somewhere else. And if not, do yourself a favor and spend a little more for something higher-quality.
Joshua
Reviewed in the United States on December 15, 2020
The kit contained everything I needed to clean my lines. The adapter hooked right up to my tap. Just followed the directions and the lines are now as good as new.
Jenshuttle
Reviewed in the United States on November 29, 2020
This kit worked perfectly for cleaning out the lines of the used kegerator that I bought. If you don’t squeeze the bottle like it says in the directions, it functions great and I’m sure will be used again and again.
Thomas Schwerin
Reviewed in the United States on October 4, 2018
This is very easy to use if you follow the directions, Its gravity fed and no "squeezing" of the bottle is needed, It comes with plenty of the cleaner to last awhile and with all the required tools needed to clean your lines and all your kegerator components. I recommend to anyone wanting to keep your lines clean!!
Tim
Reviewed in the United States on December 18, 2014
Cleans the keg lines really well. Can't beat the price.You don't want to be THAT GUY with the dirty lines, so I would definitely recommend buying this or something similar if you have a kegerator at home. If you have tons of lines running all over the place, I'd go for a professional (expensive) kit.
phxhoff
Reviewed in the United States on October 8, 2012
Just used the kit on my kegerator lines. Pretty simple product, what you see in the product photos is what you get, nothing special about this but it gets the job done. It is really easy to use and seemed to clear out any junk stuck to the side of the lines. I did appreciate the instructions, included how to disassemble the faucet/tap handle and gave hints on solving issues with your beer (taste, foam, etc.). The bottle has to be loosened a few times to allow air back into the system as you run the cleaner through the lines. Also, the wire contraption that is sent to keep the tap coupler open is very cheap and fell apart on me- its a piece of wire shoved into a wire nut with some sort of glue holding it in place, you could definitely make this on your own, but it is helpful. I had to use some pliers to pull the wire out, as the wire nut came away from the wire. Overall, happy with the results.