Your cart is empty.
Your cart is empty.The TERAFLEX JK ARB compressor under seat mounting kit is a simple solution to mount the ARB on-board hi performance twin air compressor under the JK Unlimited front passenger seat and provides maximum protection from damage and from the elements. This kit also allows the manifold and locker solenoids to be mounted next to the compressor for simple hose routing. It includes a vent exhaust hose kit to safely route fumes to the exterior of the vehicle.
Customer
Reviewed in Canada on March 17, 2025
Made installing a dual ARB super easy. It does fit the driver side too!
Grease Monkey
Reviewed in the United States on February 9, 2025
Early JKU install, the only issues i had were with the passenger side airbag sensors.On the early JK (07), they have 4 sensor/seat stand offs.The instructions didn't cover that, and i couldn't find any reference to it.I ended up using a washer that was about the same thickness of the mounting plate to make it work out.But i thought about doing a delete of those sensors for a few minutes while scratching my head.I also opted for the under seat install after asking around.It seemed to be the best option for a nice long compressor life span due to under hood temps.
Adam
Reviewed in the United Arab Emirates on May 12, 2024
It doesn’t work for 2015 JK 2 door. So much work just to realize it does not fit the seat. Just because 2 door jeep has a bit different seat mechanism. Waisted money
Valerie
Reviewed in the United States on June 18, 2021
This is made for the ARB twin compressor. I used it with the ARB single compressor. I didn't want to mount the ARB under the hood n didn't want to drill holes in the floor of my Jeep. Found this on accident on YouTube. Wasn't sure if it would work with the single ARB. I called Teraflex to ask. The rep said it should work with little modification. All the holes may not line up. Drill a couple if they don't. Four holes lined up. Great mod by Teraflex
Joshua Bernhard
Reviewed in the United States on September 8, 2020
Works well for me. Had to get creative with how the hose routes at a 45. Please do research. This is not plug and play.
Brett A
Reviewed in the United States on December 20, 2018
The mount is solid but it is a bummer that they weren't able to get it any higher as it makes solid contact with the floor on it's entire top surface, including pinching the air line (though air still flows)
Clay Childress
Reviewed in the United States on January 31, 2018
Everything fit perfectly. This seems to be a good place for the ARB Twin compressor to be. I had zero issues with the installation and am happy to have it there.
Magilla
Reviewed in the United States on August 9, 2017
Install went quickly. Routed wiring through rubber drain plug below seat to battery. Works perfectly.
T. Berry
Reviewed in the United States on July 18, 2016
The outlet line on the compressor will be in contact with the carpet under the seat. I made a heat shield but they claim you don't need it.
Recommended Products
