Shopping Cart

Your cart is empty.

Your cart is empty.

The ROP Shop | Power Pressure Washer Water Pump for Excell EXH2425, with Honda Sprayer Engines

4.4 (8) Write Review
Free shipping on orders over $29.99

$84.99

$ 34 .99 $34.99

In Stock

About this item

  • FEATURE: Maximum Pressure: 3000 PSI. Maximum Flow: 2.5 GPM. Maximum Pump Speed: 3450 RPM. Shaft Diameter: 3/4" Shaft. 4 Bolt Pattern: 2 5/8" Center to Center between Outer Holes. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information
  • BUILT TO LAST: (1) Horizontal Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve, Outlet Tube, (1) Keyway, & (1) Hose; comes as shown in the first image
  • SIMPLE INSTALLATION: This pump mounts horizontal and can face any direction that allows the hose connections to be accessible. Pump needs at least 6HP to handle PSI. Pump head CANNOT be flipped, but pump can be mounted in different directions
  • COMPATIBLE: Replacement pump for * Troy-Bilt 020241, 020242, 020208, 20209 * Karcher K2400HH, G2400HH * Briggs & Stratton 020263, 020325-0 * Campbell PW2011, PW2210 * DeWalt DH3028, DPD3000lC * Excell * Mi-T-M * Simpson * Generac * & more. Compatible with Honda GC160 and GC190 engines with a 3/4" engine shaft diameter.
  • NOTE: It is not recommended to run any pressure washer pump above its maximum PSI rating. Doing so can result in damage to the pump (not covered by warranty) and/or serious bodily injury


Product Description

Pressure Washer Pumps Compatible Brands

  • Many pumps are. However, compatible replacement options do vary depending on your pressure washer’s engine shaft diameter & engine orientation, the original pump’s bolt pattern, and your engine's horsepower.

  • Your original pump was likely a strap-style (or bow tie) pump. That style isn’t made anymore. However, you can remove the spline and use your model number to find a replacement pump that you’ll install directly onto the shaft with a keyway.

  • Our pumps do require a keyway for installation onto the engine shaft. If a keyway is pictured in the listing, it will come with one. If you need to purchase one separately, you can do so from our catalog.

  • Many of our pumps don’t require oil maintenance, but some models do need oil changes. Generally, pumps with an oil vent port will need regular oil changes. Pumps without that port are sealed units and don’t need oil changes.


Richard
Reviewed in the United States on August 16, 2024
Pump works well but I had to take some small parts off the old pump, it is not a just bolt on and use.
MVirginia
Reviewed in the United States on July 4, 2023
Replaced a 23-yr old pump to make power washer run like new. Easy install IF the old pump can be removed easily (mine needed to be cut apart to remove from spindle). Neighbor loves it! Hope to get it back one day.
J Como
Reviewed in the United States on May 29, 2023
Saved a few hundred by replacing the pump. Works good as new.
NR
Reviewed in the United States on September 30, 2019
Perfect fit replacement for my Excel pressure washer. Works with more power than the original and is smaller so the washer is lighter.If your washer does not use the M22 make or female fittings for the hose to pump be sure to order them as well. Amazon has them for sale and they are only $5-10. But you will need them to connect your older style hose to the pump.
Tammy
Reviewed in the United States on June 9, 2019
Thanks to the detailed information when ordering this pump, when it arrived I was able to bolt it right on my old motor perfectly. I fired it up and was impressed with the pressure it has. I did have to change out the high pressure hose fitting with my old quick connect adapter but it was real simple.
Keith A Elder
Reviewed in the United States on June 30, 2019
This pump is a direct fit replacement for the failed Devillbis power-washer I had. Fired the washer up and the pump performed like a champ.
John Beck
Reviewed in the United States on June 1, 2019
The pump mounted to my engine perfectly, and I fired it up to make sure it did indeed pressurize water, which it did. Then I tried to connect the pressure-side hose/wand and found no way to do so. After talking with 2 local hardware stores and finally a professional plumber, I'm certain that the fitting did not come out of factory to specifications or US standard (NPT). I'm returning it now, I wish I could get back those wasted 4 hours.
WoodHobbit
Reviewed in the United States on October 10, 2019
I’ve an Excell EXH 2425 powerwasher with a 5.0 hp Honda GC 160 engine. It has a 3/4” output shaft, with key. This pump arrived, took it out of the box, put it on (perfect fit), and started it up. I’ve put ~3 hours on it and it’s been perfect. Note: it did not come with the high-pressure hose adaptor so I had to reuse the one off the old pump. Not a problem unless you’ve discarded your old pump.