Your cart is empty.
Your cart is empty.Product Description
Thermal Grizzly minus pad 8
Efficient Heat Dissipation with minus pad 8
The minus pad 8 combines good thermal conductivity with a soft and flexible structure. It is designed to ensure optimal heat transfer. Thanks to its high adaptability, it perfectly compensates for surface irregularities and ensures even heat distribution.
Reliable for Beginners and Advanced Users
The minus pad 8 is the ideal choice for anyone in need of a reliable thermal interface solution. With its high compressibility, it adapts to different surfaces and enables efficient heat dissipation, even with low contact pressure.
Three Sizes for Every Application
The minus pad 8 is available in 30x30mm, 100x100mm & 120x20mm sizes, with thickness options of 0.5mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm. Set packs are also available for some sizes.
Anon
Reviewed in the United States on September 4, 2024
Exactly what I needed to replace the thermal pads on my Xbox One X. 10/10 recommend. If you order the 120x20x1.5mm pad, you will need 2 to accomplish this job.
Chris-D-Phone
Reviewed in the United States on August 18, 2024
No notes. Simply works and provides temperature control in my laptop
Brady Bud Eddards
Reviewed in the United States on May 10, 2024
They might be expensive but they work the best in my opinion.
Adan
Reviewed in Spain on December 18, 2024
Se pega y funciona bien.
Abdulghaffar
Reviewed in Saudi Arabia on December 1, 2024
Working well.
magis123
Reviewed in the United States on June 15, 2023
Bought these to do a thermal upgrade on my RBA. They worked great and reduced ambient temps by 12*C and load temps by 15*C. Highly recommended.
Omar
Reviewed in the United Arab Emirates on December 26, 2022
Yes, it is a bit more expensive; but, this is an install and forget item. Got a 5 degree reduction on my SSD thermals
TA
Reviewed in Japan on August 4, 2021
GPUに使いました。GTX1080のコンデンサ類とヒートシンクと接触してる部分に貼り付けました。GPUBOOST3.0で2025hzまで上がって負荷テストでも常に50度を超えない化け物級の冷えさで効果は抜群です。自分はよく見ずに購入したのですが、サーマルパッドは一つしか入ってませんでした。二の前にならないようにレビューを書きました。
TRC719
Reviewed in the United States on July 23, 2021
After reading some customer reviews I choose this product to rehab my Quadro FX4800 graphics card which seemed to be having heat related problems(glitchy, slow response). You cut the material to size, peel the clear film off and apply to the memory chips on both sides plus a few other parts, wherever there was the old silicone material. I used silver thermal paste for the main processor housing. This made quite a noticeable difference in graphics performance, and heat dissipation seems improved. I used both the 1.5 and 1 mm thickness material which seemed right, you'll want to have an idea of the thickness you need before ordering.
Taylor Simmons
Reviewed in the United States on June 17, 2021
Honestly, yes, there is some sticker shock per usual with Thermal Grizzly products. However, replacing the factory thermal pads on an Aorus Xtreme 3080 with these TG pads convinced my dad to love me again AND brought my temps down almost 20 degrees while mining in the hottest summer I've ever experienced. They paid for themselves in less than a month of use.Remember folks, if you're hot, they are too.
E.Yang
Reviewed in the United States on July 22, 2020
Anyone that owns an X570 Taichi motherboard knows that Asrock messed up the chipset fan design on this board in favor of aesthetics. This means that the fan gets completely blocked by your GPU card. It was fine initially, running at ~60 C idle, ramping to 75C under constant load. But 1 year later, I found games crashing on my system after a few hours of play, and it turned out that my SB chipset temps were peaking at 85C!I tore down the chipset fan and replaced the factory TIM with these pads, then buttoned it back up. Now my idle temps have been restored to ~60 C, and under load, I am peaking at 70C. These temps are well within spec, but still not as good as the competition (MSI). We'll see how they hold up 1 year later assuming I still own this board. A 15C temp drop is a big win in my books. Thx Thermal Grizzly.
Nathaniel
Reviewed in the United States on July 4, 2019
I got this because I was in the process of upgradding my cpu so I decided to clean out my open loop and monoblock/gpu block out. I took apart my 1080 ti and noticed the thermal pads on the memory were off on some chips. It made me remember when i got the card new i was ablt to do a 400+mhz oc on the memory for a bit and i had to turn off the oc because it mad it unstable. Also the pads were cheap 0.5mm thermal pads. I replaed then with 1.5mm and mashed them down to cover the whole memory chip. I would have took pics if I knew how well it would work. Basically I increased the heat surface area to transfer to the vga block by using over cut and over thick cuts of thermal pads. I noticed right at boot. My card now car oc 400mhz on memory and my gpu core went down 5c under full load. I also used them on my mono block and south bridge on my mb and they were better then what was being replaced. These seem like they will last a long time. One of these was just enough to do all 11 memory chips on my 1080 ti with no room for error.
MrThou
Reviewed in Canada on October 8, 2019
Works really well for replacing thermal pads on old GPUs. This helped my GPU run cooler as well, due to it being a much higher quality thermal pad
Recommended Products