Shopping Cart

Your cart is empty.

Your cart is empty.

Thermal Imaging Camera for Android USB-C, Infrared Thermal Camera 256 x192 IR Resolution,25Hz Refresh Rate,-4℉ to 1112°F Thermal Imager for HVAC Home Inspection,Electrical,Plumbing,Automotive

Free shipping on orders over $29.99

$149.99

$ 63 .99 $63.99

In Stock

About this item

  • 【Super Resolution, Ultimate Thermal Imaging Experience】:Featuring the RuoShui 328B Super Resolution algorithm, the thermal imager takes real-time IR image enhancement as the resolution jumps from 256x192 detector resolution to an impressive 640x480 imaging resolution. Provide 50° Wide angle and 56° X42° FOV to viewing, 8-14 μm Wavelength, thanks to the high frame rate of 25 Hz. With a high thermal sensitivity of <50mK, this thermal camera captures high-resolution thermal details like never before. NOTE:MUST BE USED WITH SMART PHONES WITH OTG FUNCTION!!!
  • 【Compact, Durable, and Versatile】:Measuring a mere 1.02x1.02x0.59 inches and weighing only 1oz, the thermal imager is built to withstand drops of up to 1m. Supporting OTG function and complemented by an anti-dust EVA bag, it's your ultimate on-the-go companion, ready for any task. Its Type-C interface and battery-free design offer unparalleled flexibility, ensuring precise measurements wherever you need them.With a 6.6ft drop test and IP54 protection rating, lifetime firmware updates, and technical support, it's perfect for harsh environments.
  • 【Accurate Temperature Measurement】:The RuoShui thermal ir camera utilizes advanced detectors, achieving a remarkable temperature sensitivity of 0.04°C and ensuring that temperature reading discrepancy remain within a maximum range of ±3°F (±2%). Additionally, the thermal imager allows users to change emissivity settings based on specific materials and adjust the distance to objects, ensuring more accurate temperature measurements on a variety of substances.
  • 【Extensive and Precise Measurement】:Elevate your temperature detection capabilities with an extended measuring temp range of -4~1122℉ (-15℃~600℃) boasting an accuracy within 3.6℉ (2℃) or 2% of the precise reading. Additionally, the thermal imaging camera offers continuous measurement capabilities, generating waveform graphs for intuitive monitoring and facilitating detailed analysis of temperature variations.
  • 【Versatile and Feature-rich】:Experience the pinnacle of thermal imaging functionality with the software, allowing for data reporting and recording for each image with the ability to export charts for every pixel point. Three dimensions: point, line, and surface, enabling simultaneous measurement across 9 areas.Customizable with six color palettes, it effortlessly visualizes temperature differences, ensuring easy interpretation and readability.
  • 【No Battery, Low Consumption】The thermo camera boasts a battery-free design, eliminating the need for charging before use. Additionally, it consumes an ultra-low amount of power, using only 0.31W, which allows it to operate for hours Laboratory tests have shown that it can run on smartphones and tablets(Type-C Port) for 6-8 hours, making it a reliable and convenient tool for long-term field use.
  • 【Portable & Durable】The thermal scanner is lightweight, weighing only 1oz (19g).It's compatible with most Android smart phones and Tablets via USB-C.The package includes a storage bag,Clean Cloth,manual and the thermal camera.With a 1-year warranty for the device, along with lifetime firmware updates and technical support, the RuoShui 328B is a reliable tool for thermal imaging.



Product Description

1110

Specifications - RuoShui 328B Thermal Imager Android

IR Resolution 256 x 192
Frame Rate 25 Hz
Sensitivity <50 mK @25 ℃, F#1.0, 25 Hz
Temperature Measurement Range -20 °C~600 °C (-4 °F~1122 °F)
Measurement Accuracy ±2 °C (±3.6 °F) or ±2% of the actual measured temperature
Emissivity 0.95 (default), adjustable from 0.01 to 1.00
Field of View 56° x 42°
IFOV 3.75 mrad
Spectral Range 8~14 μm
Protection Level IP54
Interface USB Type-C (Android)
  • 1)There is a two-dimensional code on the packaging box, please to scan the code and you can get the App. You also can go to the Play Store or Google Store to Download the App .2)You need open OTG function in your phone.Then you can plug and play.

  • RuoShui 328B is versatile and widely used across industries such as automotive HVAC electrical maintenance plumbing and construction. It helps professionals detect heat patterns, locate leaks, identify faulty components, and ensure system efficiency.

  • Yes,the camera connects to your Android via USB-C. The app is user-friendly for all skill levels, with auto calibration and easy navigation. Beginners can capture images effortlessly, while professionals can access advanced analysis features.

  • The thermal infrared camera is compatible with most Android smartphones and tablets with a USB-C port, running Android 10+ (OTG support). Please check your device specifications for compatibility before purchase.


Ravanja
Reviewed in the United States on February 24, 2025
As many of the reviews have shown, this camera works well with the app on an Android phone. I thought I'd be a little different and see if I can make it work on a PC with Windows 11.Sure enough, it was effortless. The PC recognized the camera instantly. Opening the Windows Camera application I could then select it and see what it see's.My test was limited as I didn't have a USB-C extension cable. So it was just hooked into the laptop itself as shown. I put a power monitor on it and as can be seen it draws about 0.2Watts or 40mA at 5Volts. This is not a lot of current, however, when I tried attaching it via a USB-C to iPhone converter, my iPhone complained that it was drawing too much current. I do however have an old XR iPhone so you may have better luck or none at all. This wasn't sold as an iPhone or PC compatible device, so that it can do the PC is a bonus.The software for the PC offers very little in the way of control. Brightness, contrast etc do not work on the camera application. Specific software may operate it differently, but as mentioned, this is already above and beyond what was stated.The fan pictures shown are from two different cameras. One is the thermal image, the other was taken by my iPhone camera in visible light, so the two can be compared showing what can be expected. The IR image looks out of focus, but that could be due to the distance being about 4 foot. The camera is likely set to infinity focus. IR images are never as sharp as visible light on cameras available to the public anyway. This camera is however quite good. It has better resolution than my TM160 and cost a lot less too. I will point out that the two shouldn't be compared since one has wifi, an EVF and is made for a different purpose.The camera is sensitive. I touched my phone for a couple of seconds and then put it in the view of the thermal camera. It could detect the residual heat from my fingers on the phone case for about 20 seconds.Overall I like it. It's not a mind blowing product as there are many versions similar in function and price as well as above and below on both.
Customer
Reviewed in the United States on February 22, 2025
Ok, i was looking for something to help with energy efficiency around the house, especially in Texas and especially in the summer. Happen to be smack dab in the middle of winter right now, but I'm seeing some very positive results. The first photo is a dog walking put the dog flap and you can see a little heater fan on the counter. The second is a basset hound on an elevated dog bed. See his chilly nose and ears? The third is our other basset sitting on a tempurpedic dog bed on the foor. She looks significantly warmer. Right away I'm going to tackle that dog door. Very informative and should pay for itself after 1 or two Texas extreme weather seasons, especially with the current coupon ot has available. Now, the instructions that came in the box did not say anything about the app, so i just went to Playstore and searched on the company name. I downloaded the second app that came up, picture attached and opened it up. Then i plugged in the device, it appeared and i was taking photos. You have to allow full access to photos, I couldn't get it to operate any other way. Few things about connecting to your phone. It probably won't connect with a phone case on. I had to remove that. I may get a usbc extension to use with it. The chunky part of the device is the lens and faces out. This is where I have a phone tether attached, so I would have had to remove the case anyway because of that. I have no idea of knowing exact accuracy, but on of the photos shows current room conditions and that all seems to match up. This is a huge, breakfast nook/kitchen/living room open space. This will work for my needs, I'm very happy. Oh, there is a setting for switching to celsius and Fahrenheit, thank goodness!
Savvy Reviewer
Reviewed in the United States on April 20, 2025
First impression: nicely made device, comes in protective case, with lens cleaner.Instructions limited to a small piece of paper with a small piece of paper with QR code for app. No other instructions or documentation. Scanned the QR code and took me to a web site to download an APK. I very reluctantly did that, as I am concerned about side loaded apps that don't come from the Google Play Store.Launched the app - it requested a number of permissions which all seemed appropriate - and plugged in the IR camera. App sat spinning and did nothing. Phone got warm so clearly there was some kind of processing going on.Researched the reviews here and found once that noted an app in the Play Store called Ruoshui Thermal. Visited the web page for it, determined it was legit and downloaded and installed it. Looked identical to the app that was side loaded. Connect the phone to the USB-C connector and the app sat spinning for a while. Disconnected and connected a few times, approved the requested permissions, and finally the app started working.While most settings in the app are intuitive, it would be helpful to have some kind of either built-in help and/or documentation as to how one should use the app, what settings for various scenarios, other usage tips.Did some initial usage to test the camera out. Satisfactory images and readings - will do some additional testing against a lab calibrated thermometer at some point.As others have pointed out - can't use this camera with a case on your mobile device. (Mine is Samsung S25 Ultra.)Three stars due to lack of documentation, downloading an app apk versus Play Store, and USB-C connector not long enough to work with mobile devices with case.
Aaron
Reviewed in the United States on April 17, 2025
I find that this thermal imaging camera integrates seamlessly with my Android device. I used it for home inspections and its clear imagery revealed hidden issues in my electrical and plumbing systems. I appreciate its smooth video performance and it handles a wide range of temperatures without maxing out. I also used it for automotive diagnostics and its portability makes it a practical tool for my work. It is very small and lightweight and it has delivered dependable results every time.
Recommended Products

$99.00

$ 43 .99 $43.99

5.0
Select Option

$279.99

$ 99 .00 $99.00

4.5
Select Option