Your cart is empty.
Your cart is empty.Product Description
Lori Thomas
Reviewed in the United States on March 25, 2025
Haven’t tried it yet, but the colors are beautiful. I’ll be back to update once I’ve cut something with it!
Deborah R. Cota
Reviewed in the United States on July 24, 2024
Not sure what to think, but my new Cricut can’t cut this. Well, it cuts but it’s not cutting through deep enough to leave the iron in adhesive .Is the material old? I don’t know what to think, and I can’t return it because I’ve used most of it trying to get it to work. Bummed be because it’s really pretty.
Angela Huntley
Reviewed in the United States on July 20, 2024
The vinyl was vibrant and colors and ease the peel.
Whynotchestnut
Reviewed in the United States on March 6, 2024
Worked well for what I needed. I suggest using "more pressure" on the cricut... And also, had to readjust the pressure on the heat press to get it to adhere. Otherwise, it came out wonderfully. The sheet is thicker than the usual siser htv, so be prepared for that when you go to cut it.
LeslyO
Reviewed in the United States on March 30, 2024
It doesn’t stick well. You have to keep on the press for like 4 minutes in order for it to stick. Haven’t done wash test so hopefully it sticks as it has nice patterns on the pack of HTV. Easy weeding and u recommend not to iron and use a heat press since it’s hard to stick
Customer
Reviewed in Canada on August 11, 2023
this vinyl works just as well as the Cricut brand. our logos turned out great and hold up in the wash. at a cheaper price point, you get a lot more product as well. I like it because Cricut doesn't have a lot of variety with their iron on vinyls. will be using this this brand again in the future.
Fran De Simone
Reviewed in Mexico on March 22, 2023
Compré una Cricut por hobby y no me considero experta así que con lo poco que sé me encantó el material ya que fue fácil de usar. Se cortó como mantequilla y para quitar los sobrantes no me costó nada. Se pegó en esta sudadera muy bien y ahora falta ver qué tan durable es pero por ahora le doy 5 estrellas.
Carmel Villanueva
Reviewed in Australia on November 27, 2022
So happy with this iron on vinyl! Works so well when put through the cricut machine! Cuts like a dream, weeds with no issues and when heat is applied, does amazingly well! Doesn't crinkle, bleed or anything. Literally like the expensive brands! Even put it on a shirt and through the wash twice so far and its held up so well! The patterns in this pack are different and each sheet makes a pretty blend!
Robin Fuller
Reviewed in Canada on September 2, 2021
Great product
Michael J McDonough
Reviewed in the United States on May 11, 2021
I am somewhat new to HTV Vinyl, and struggled to come up with the PERFECT design/saying for my lavender tee...The design I chose was too intricate for this vinyl. I used the "HTV, not Cricut Brand" as my material, and forgot to change the pressure setting to the most pressure. That said, I had to go back and pick and pull several of the small details out of the sheet and apply them with tweezers to the transfer tape.When Pressing the design with my Cricut Heat Press, I set the settings to 280º and pressed the shirt for 15 seconds, applied the design, and pressed the design with transfer tape 40 seconds, turned the shirt to the backside and pressed an additional 40 seconds (this step is highly recommended by most (if not all) of the makers I follow on YouTube). When I turned the shirt back over and attempted to do a "warm peel", the design appeared as though it wanted to peel off with the transfer tape. I applied heat again for an additional 40 seconds, this time allowing it to cool before peeling. The HTV appeared to have stuck better to the shirt; however, there are still a couple of places that I am skeptical about. In hindsight, they consider this a "sport flex" and I wish I would have increased the temp from 280º to 305ºI do wish the vinyl sheets were available in multiple sizes or on a roll, at least 12x12. I LOVE the tie-dye colors. I am hoping to do something with the other sheets in the packet this week. I will increase the pressure and the temperature of my Easy Press and give an update on my review. Until Then... I would recommend this product if you know your Cutting Machine & Heat Press. I would not recommend this product to beginners.*UPDATE:This has turned out to be one of my favorite shirts to wear, so it has had MANY almost WEEKLY wash and dries. While I am picky when it comes to separating my clothes before washing, so being lavender, it gets washed with reds on cold, I am not one to pay a whole lot of attention to make sure I wash inside out or even worse about drying a certain way, and almost never hang anything to dry. So this shirt gets NO special attention about how it is dried! All that said, is this vinyl has held up better than my cricut glitter vinyl on my shirt. No peeling at the intricate points of the design! VERY PLEASED with the washing and drying and the weekly wear I get out of this shirt!!!
momma's boy
Reviewed in the United States on May 10, 2021
The finished product was nice. However i had to use HTV glitter, 33 force and pass 2 in order for the vinyl to cut. The vinyl pressed well, remove clear stick immediately because if cools any it is hard to remove. instructions not helpful, wasted a sheet trying figure it out.
Shan
Reviewed in the United Kingdom on December 28, 2021
The media could not be loaded.
Ellen Paloti
Reviewed in the United States on April 12, 2021
I had to review this item because the horrible reviews I read really had me apprehensive to use this vinyl. As a first time EVER using iron on vinyl I was petrified after reading the reviews and convinced I was going to ruin my material even attempting to use this stuff. However, it went on with out any problems and looks great! I used parchment paper on top of the carrier clear they have on the vinyl just to be safe that it didn't stick to my iron. I set my iron on silk. I held it on the parchment paper for about 30 seconds pushing firmly, then removed the parchment paper and put the iron directly on the carrier plastic for another 15 seconds or so. I slowly removed the plastic from the vinyl and it came off with no problem. I'm happy with the vinyl and would use it again. Just take your time, don't heat up your iron or press to a super high setting and cutting it with my cricut maker I jut set it to iron on vinyl and put more pressure, it cut without any problems too.
Recommended Products