Your cart is empty.
Your cart is empty.Product Description
Specification:
Water Temp Gauge: 130 to 280 ℉
AMP Meter: -60 to 60 AMP
Oil Pressure Gauge: 0 to 100 psi
compatible with Most Hot Rods And Classics Engines.
suitable for 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 347 352 360 390 406 427 428 429 460 351C 273 318 340 360 361 383 400 413 440 455 330 326 engines.
Daman
Reviewed in the United States on February 3, 2025
I bought these mainly for the fuel gauge. That's accurate. The oil pressure and water temp are pretty close to right on as well
71 Monte
Reviewed in the United States on January 31, 2025
These arrived in cheap thin cardboard boxes that were split open and the gauges were rolling around in the shipping box and received some pretty good scratches. A few of the mounting nuts had made their escape and were nowhere to be found. The temperature gauge does come with a sending unit but there is nothing included for the other two gauges. The markings on the temp and oil pressure gauges are close together and you have to really look at them to see what you are reading. The temperature gauge only reads up to 220 and should read higher. Overall it's a cheap set which requires you to spend extra money on fittings, lines and mounting bolts. Better off spending a little more and getting a decent set with everything included.
Corey
Reviewed in the United States on January 2, 2025
This is a pretty amazing value on new fully mechanical gauges.The water temp gauge is a sealed system with a pretty long tube. Just get it into your water hole and it's done.The Oil P gauge you're going to have to provide your own tubing with flare nut. Hopefully the one already in your car is still good.I haven't setup the fuel gauge yet, can't speak to the correct v range for that.
Steve
Reviewed in the United States on January 18, 2025
Didn't work on my Buick Lesabre
Ron and bev Campbell
Reviewed in the United States on April 9, 2025
Oil gauge is off by 25 lbs junk and fuel can't get it to work don't buy them the water one is the only one that works
Buddy
Reviewed in the United States on August 23, 2024
Just pulled it out of the box. Needle is behind the zero out mark. Threads for fitting are junk plus there is solder in the whole. Can't be used. Wouldn't recommend.
Recommended Products