Shopping Cart

Your cart is empty.

Your cart is empty.

Tube Valve MM mc Turntable Phono preamplifier preamp Amplifier

Free shipping on orders over $29.99

$139.99

$ 59 .99 $59.99

In Stock
  • With bass treble adjust
  • A pure valve preamplifier, make sound more warm.
  • featuring two 6E2 vacuum tubes that offer a dynamic signal level display through the magic eye and two 6A2 tubes known for their warm, natural, and full-bodied sound.
  • Audiophiler MKP pro audio coupling capacitor.and nichicon filtering capacitance
  • Plug-and-Play with Ease: The T9's pluggable tube socket design allows for easy replacement with different tube types such as 6K4, EF93, 6BA6, W727, etc., giving you the flexibility to customize your sound signature and enjoy a variety of tube sounds. Included with your purchase is a DC12V power supply, comprehensive manual, and all necessary components for seamless setup and enjoyment.


Description


Warm Tips
1. The bias and gain of two 6E2 tubes are set well before shipping, please pay attention to the R/L channel markings on the tubes, don't insert them wrongly during installation.
2. 3.5mm headphone jack with priority, please make sure the headphone has been disconnected if you want RCA output.
3. Pluggable tube socket design, convenient to be replaced by 6K4, EF93, 6BA6, W727 etc. to enjoy tube sound of different styles.
4. T9 is a preamp not a power amplifier, needed to work with amplifiers or active speakers.

-----------------------------------------------------------------------------

  • Attractive looking and powerful design: all metal case and CNC aluminum panel with good shielding performance to avoid external interference. Solid and durable knurled knob, all I/O interfaces are gold-plated to ensure the tight and smooth transmission of the original audio signal to minimize the loss of the signal.

  • 3.5mm headphone output and tone control: besides stereo RCA output also with independent 3.5 mm headphone amp circuit, easily to drive all 16-300Ω headphones. More delicate and smooth sound with rousing highs and deep lows can be enjoyed by adjusting the treble / bass knob, rejuvenating your audio system.

  • T9 tube preamp with Phono and RCA inputs:
    Phono input, support both MM /MC cartridges with one button to switch, convert phono signal to line level signal, low-noise integrated circuits and high-quality components to ensure clear sound.
    Stereo L/R RCA input, amplify the low level audio signal from your phone, tablet, PC, MP3 etc., easier to drive amplifiers or active speakers and greatly improve their sound quality.

  • Vintage vacuum tubes to provide double enjoyments: add magic eye 6E2 tubes to show the signal level dynamically, the color is pure with high brightness, also with switchable cold green and warm orange backlights, wonderful visual feast can be attained; default 6A2 tubes to improves everything associated with music, sounds warm and natural, full and mellow, amazing auditory carnival for your ears.

Parameters

  • Audio input: Stereo RCA / Phono MM(MC)

  • Audio output: Stereo RCA / 3.5mm Headphone Jack

  • Headphone impedance range: 16-300Ω

  • Headphone output power:

250mW@32Ω
100mW@64Ω
60mW@128Ω
  • RCA IN:

Input level: 0.775V RMS Output level: 1.5V RMS Input impedance: 100K ohm SNR: ≥106dB Frequency response: 20Hz-20KHz (±0.5dB)
  • PHONO IN:

Input level: 0.005V RMS (MM) / 0.0005V RMS (MC) Output level: 0.6V RMS
Input impedance: 47K ohm (MM) / 330ohm (MC) SNR: ≥80dB Frequency response: Ref to RIAA ±2dB
  • THD: ≤0.1%

  • Tube: 2×6E2; 2×6A2

  • Treble&Bass: ±10dB

  • Backlight Color adjustable: GREEN/ORANGE/OFF

  • Working voltage: DC 12V(≥1A)

  • Dimensions (W*D*H): 154*87*47mm / 6.06*3.43*1.85in

  • Package dimensions(W*D*H): 210*190*100mm / 8.27*7.48*3.94in

  • Net weight: 600g/1.32lb

__________________________________________

    • 1*T9 Preamp

    • 2*6E2 Tube

    • 2*6A2 Tube

    • 1*DC12V Power Supply

    • 1*Manual

    Packing List
    • Package weight: 1.0kg/2.20lb


publio morera
Reviewed in the United States on April 16, 2025
If you are looking for the sound of tubes without buying an expensive tube amp. this is for you.Sweet sounding pre-amp! Low on features but it gets the job done.The only thing I dint like is a loud pop when you turn the power off but that can be remedied by turning the volume down before shutting down.
Sean Oconnell
Reviewed in the United States on October 6, 2018
I use this in a DIY High end setup with some very serious speakers that are close to 2K just for the parts (Aurum Cantus G1, Morel TSCM634, Audyn/Jantzen capacitors, Foil inductors) with 2 different amps. and have been very impressed. I have modded it as well with jantzen Z-Silver caps(i did not try the original caps i used the caps from another diy pre). This preamp is of an excellent design The power supply and transformer are far in the back and the signal path is as short and simple as possible. This preamp has a nice warmth and no compromise in detail bass is clean not boomy, horns and vocals are completely life-like and treble is very sweet. This is an excellent deal you would have to pay top dollar to get even close to the sound quality this can provide. Building it was pretty simple as long as you can match the wires(which the manufacturer has a good diagram).
Shane
Reviewed in the United States on April 30, 2014
Really adds that extra push to my stereo system when listening to LP's. When I listen to cd's that were originally recorded on analog tape, this little preamp seems to fill out the sound. It makes it sound like it was recorded yesterday. Very easy to put together. Wiring wasn't marked like I thought it should be, but I found a video on You Tube that showed the proper set up.
syeds2000
Reviewed in the United States on April 29, 2014
I bought this preamp about 2 months ago with GE5670 valve. It was packaged well and was very simple to put it together. After few hours of run time, I noticed the stereo imaging, staging, and instrument separation just got way better then my Morrison ELAD line level preamp. My setup includes KEF 203, Emotiva XPA-2, MIT Cable. I am sure some of the expensive preamps are absolutely great, but this P3 is amazing considering the price I paid. Highly recommend for anyone wanting to play with tube preamp. I am looking forward to other peoples comments on what they have done to improve sound quality to the next level. I can't wait to try this combo with my Fostex dyi speakers I am building soon.