Your cart is empty.
Your cart is empty.Product Description
Momentary Type: Push and Hold - ON, Release - OFF
Special Note: This is a momentary switch
Mounting Cut Hole: about 15.6mm/0.6";Head diameter: 19.2mm/0.75";2 terminals
Colors include:Black body, Yellow+Red +Blue +Green+Black button
David M.
Reviewed in the United States on January 31, 2025
Good general purpose low voltage pushbuttons
RONNIE REID
Reviewed in the United States on August 25, 2024
These switches are very good quality, and very quick delivery.
MAZ
Reviewed in the United States on November 13, 2024
The switches themselves are good. Most of the nuts supplied are either too big or are not the same thread pitch of the switch bodies. Hot melt glue is your friend.
frobernal
Reviewed in the United States on October 2, 2024
Wish they were a little "lighter" to push, but still not bad. Worked great for a diy project. Quality control doesn't seem to be consistent with the threaded parts and nuts, so good thing they come in sets.
Lee Neigel
Reviewed in Canada on May 23, 2023
Easy to install. Simple wiring and a super simple way to hotrod your guitar
Chris Weileder
Reviewed in Canada on October 28, 2022
Good Quality for price, easy to use. Used in my ATS/ETS truck sim button box. Worked great. See pics
Thierry Francoeur
Reviewed in Canada on July 21, 2021
Fonctionne très bien mais les connecteurs semblent un peu fragiles
corey f.
Reviewed in Canada on July 17, 2021
Out of 10 only 2 didn’t work so pleased only needed 5 so have 3 spare
Nomad
Reviewed in Canada on June 17, 2021
These are very cheap, and look exactly as pictured. The buttons are a good shape for fingers (many other ones are pointed and honestly terrible for this reason alone), and I found the build quality to be very consistent.I do wish the leads were a bit larger, specifically to be able to slide bare 18awg wiring through and that the springs were a bit softer (as most hobby applications are going to be using at least wire of that thickness), but again for the price and quantity packaged, no real complaints. Plus, if the leads were much larger, they wouldn't necessarily fit into small areas like these are designed for, and I can imagine that would encourage people to use them with a lot higher voltage than they are good for anyway.Also, even though the springs are maybe 20% harder than I'd have liked for my specific use, the push distance and how they actually track up and down is good, and I wouldn't call these "hard" by any means.
Brent K.
Reviewed in the United States on March 17, 2021
Work well. Not expensive. Look good. Too much heat will melt the housing when soldering and dislodge the pins but that was more about my poor soldering than the buttons.
Floyd Miller
Reviewed in the United States on August 20, 2020
liked the multi colors. work great, an at a great price.
Joey E.
Reviewed in the United States on June 29, 2020
Update: after installing and using these several times, i have already had to swap out 3 of these because they work for a day and quit. Its a simple switch so i dont understand what is wrong. After the first day and it sits, they take 50-100 clicks to actuate even once. One star is all i can give. Unfortunatey these arent even worth the cheap price i paid for 10 of them.Initially, i was gonna return these because they were not what i expected. However, after thinking on it, i decided to keep them because they are handy. I swapped the switches i initially had completely and rewired and actually like these pretty good. Time will tell if they hold up. The button is very easy to remove which worries me a little. I will try to remember to post a review later as to longevity.
ORLANDO
Reviewed in the United States on January 21, 2020
The product is built well. It worked perfect for my application. I don’t think I will be using the yellow ones though, they are a bit off yellow like a cheap plastic yellow of that makes any sense. But other than that great product.
Recommended Products