Shopping Cart

Your cart is empty.

Your cart is empty.

UHPPOTE 125KHz RFID Stand-Alone Door Access Control Keypad Support 500 Users

Free shipping on orders over $29.99

$19.90

$ 7 .99 $7.99

In Stock

About this item

  • ✅Contactless RFID transponder technology
  • ✅Full programming from the keypad; Doesn't need to connect on the computer, can works alone
  • ✅The access control machine is made of high quanlity ABS plastic and the panel is made of hard shell rubber film.
  • ✅Lock output current short circuit protection
  • ✅It is widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.



Product Description

A01 access keypad

Features:

  • Full programming from the keypad
  • High quality and high security
  • Sensitively and response quickly
  • Classical appearance with useful function
  • Designed for home and office
  • Supports Card, PIN, Card + PIN, Card or PIN
  • Adjustable door open time (0-99 seconds)
  • Very low power consumption
  • Lock output current short circuit protection
  • Built-in buzzer; No keypad backlight
  • Red, blue, white, yelolw and green LED indicators display the working status
  • It is widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.

Specification:

  • Operating Voltage: 12VDC
  • Lock Output Load: Max. 1.5A
  • Idle Current: 50mA
  • RFID Card Capacity: 500
  • User PIN Capactity: 500
  • PIN Digits: 4-8 digits
  • Card Type: Standard 125KHz EM
  • Door Relay Time: 0-99 seconds
  • Compatible Cards: EM compatible card (Can't support some encrypted cards,such as HID, Indala, Cobra, APCiK ,Paradox, Radio, Honeywell, etc.)
  • External Reader: Not support
  • Waterproof: Not support
  • Keypad Backlight: Not support
  • Shell Material: Plastic
  • Product Weight: 3.5oz (100g)
  • Card Reading Distance: Max. 2-23/64" (6cm)
  • Shell Dimensions: 3-15/16"x3-15/16"x47/64" (100x100x18.5mm)
  • Door Open Options (admin user selectable): Card Only / Password Only / Card + Password / Card or Password
  • Working Temperature: -22°F~140°F (-30°C~60°C)
  • Working Humidity: 10%-90%RH, non-condensing
  • Wiring Connections: Electric Lock, Exit Button, External Bell

Package List:

  • 1 x Access control keypad
  • 1 x English user manual
  • 4 x Rubber plugs used for fixing the shell
  • 4 x Self-Tapping screws used for fixing the shell

Humanization Design:

1

High-performance 32-bit MCU:

  • It uses high performance 32-bit MCU mainstream microcontroller which could offer a high level of integration to ensure the stable performance. In addition, the MCU microcontroller also combines the optimized dynamic consumption with a comprehensive set of power-saving modes to make the power consumption lower.

1

High Performance:

  • The switch mode power supply (SMPS) solution which adopts the synchronous step-down DC-DC converter can greatly reduce the heat generated by the circuit board.
  • Power relay provides excellent switching performance for electric locks.

A01 access keypad

Multi-colored Light Indicator:

  • Red shows the device is in the standby mode.
  • Green shows the operation is successful.
  • Blue shows the device is in the programmimng mode.
  • LED indicator flashes red 3 times to show that the operation is failed.

Common Power Supply Diagram:

A01 access control wiring

Type of Electronic Lock:

  • Fail-secure lock (locked when power removed), such as electronic controlling lock, smart lock, etc.
  • Fail-safe lock (unlocked when power removed), such as eletromagnetic lock, electronic bolt lock, etc.

Principle of Electronic Lock:

  • The relay will close contact to unlock the lock and will release after unlocking
  • COM: Common, relay contact
  • NC: Normal close, normally keep closed to COM
  • NO: Normal open, normally keep opened to COM

Special Power Supply Diagram:

A01 access keypad wiring
A01 access keypad install

  • Remove the back cover from the keypad
  • Drill 4 holes on the wall for the self-tapping screws and 1 hole for the cable
  • Put the supplied rubber plugs into the 4 holes
  • Fix the back cover firmly on the wall with 4 self-tapping screws
  • Thread the cable through the cable hole
  • Attach the keypad to the back cover

Lew Medlin
Reviewed in the United States on February 18, 2025
Stopped working
alm
Reviewed in the United States on December 28, 2024
perfect for what I needed
David L. Little
Reviewed in the United States on September 8, 2023
Although the instructions for programming are not great, these panels are better than the other access control keypads I have been using. The touch of the buttons is crisp, and they feel fairly durable. They are NOT waterproof on the back side, so either caulking or weather shielding might be important for an outdoor installation.They have a number of features that allows for quite a few general use settings, but they do not allow different control settings for each individual user. Example: if you would like to restrict access for some people by RFID device + password, it will be necessary to have all users limited in the same way. The programming does allow a master passcode for entry, but not any RFID devices.Although it has not been a problem yet on my new installation, the field strength of the control keypad is not very strong. You need to be quite close for your card or RFID tag to be read.The two RFID cards that came with the reader do not seem to be numbered in any way, so removing those card individually from the device list will be impossible, despite the fact that the programming allows it.Entering the new programming is a bit fussy: take the time to learn all the keystrokes in advance of doing any keypad changes, and allow the device to respond at the right moments to the incoming data. If you just punch in your ordered list of button pushes, you are likely to fail.
Tom
Reviewed in the United States on June 28, 2022
Even though I installed and powered up the unit correctly.No good if You Can’t program the keypad!
Amanda
Reviewed in the United States on August 10, 2020
Awesome product. I have several and this was a replacement for one that broke. Works well
Danno
Reviewed in the United States on June 22, 2019
This is a cheap, inexpensive system but works surprisingly simple and well. It is NOT software based or able to be controlled by a web browser.
FABRIZIO
Reviewed in the United States on April 27, 2019
I liked the possibility to control directly a door. Very good value
M. S. Taylor
Reviewed in the United Kingdom on March 3, 2018
Great product for price
f1td
Reviewed in the United Kingdom on March 9, 2017
Easy to install just make sure you read the instructions and wiring diagram, very please with it
police diver
Reviewed in the United States on July 27, 2016
Not the one I thought it was but it will work when I get them program