Shopping Cart

Your cart is empty.

Your cart is empty.

U.S. Solid 3/8' Brass Solenoid Valve - 110V AC, Normally Closed, 145 PSI Electric Valve for Water, Air, Diesel

4.5 (2) Write Review
Free shipping on orders over $29.99

$44.45

$ 19 .99 $19.99

In Stock

1.:1 Inch


2.MaterialType:Brass


About this item

  • SPECIFICATIONS: With a pressure rating of 0.1 - 10 bar and a temperature range of -10 to 120°C, the valve is suitable for most applications. The normally closed valve has a 3/8 inch NPT threaded connection and operates on AC 110V +/-10%
  • EXACT CONTROL: The electric solenoid valve can be perfectly adjusted to the desired parameters thanks to the precise mechanism. You will get exactly the flow rate you need without any fluctuations
  • HIGH QUALITY: For our U.S SOLID 110V solenoid valve, we use sturdy brass, which in combination with the VITON seal ensures special durability. The seal can withstand very high temperatures and is resistant to chemicals with optimal sealing.
  • IMPORTANT: The valve must be installed horizontally, the arrow indicates the direction of flow. To ensure long life, the solenoid valve should not be operated for more than 8 hours
  • VERSATILE: The electro valve can be used in various fields such as home, commercial and medical. Due to the special features, perfect flow rate adjustment is achieved


Product Description

Solenoid valve

Technical Specifications

Model USS-YSV00039
Port Size 3/8", NPT
Body Material Brass
Gasket / Diaphragm / Seal VITON
Operating Mode Normally Closed, Semi-direct
Voltage AC 110V ± 10%
Current 0.1 A
Power Rating 22 VA
Flow Aperture 12 mm
Flow Value 4.5 Cv
Operational Pressure Range 1.45 to 145 PSI (for Air, Water, Oil)
Operational Temperature -22℉ (-30°C) to 302℉ (150°C)
Suitable Media Air, water, oil, natural gas, gasoline, diesel fuel, kerosene, low viscosity fluids (less than 20 centistokes), etc.
1
1

About Filter Installation

To avoid valve issues like leakage or jamming, make sure to install a filter if the water contains particles. If the valve can't fully open or close, it may be clogged with impurities. In this case, open the valve and clean the internal components.

2

About Duty Cycles

It is normal for solenoid valves to heat up after prolonged operation. Our coil can withstand up to 356°F. While the valve supports 100% continuous duty, continuous use is not recommended as it may shorten the valve's life and burn out the coil.

  • The solenoid valves have an IP65 rating, which means they can withstand spray from water. However, if permanently installed outdoors, it is recommended that you enclose the valves in some protective housing. They are not meant for use underwater.

  • All solenoid valves require a minimum pressure to actuate. These semi-direct operated valves require at least 14.5 PSI. The maximum pressure is 145 PSI.

  • Note the arrow on the solenoid valve body indicating the flow direction. Install the solenoid valve only in the specified flow direction to ensure proper functionality. Installing it in the opposite direction can result in malfunctions.

Solenoid valve-IP65

911
Reviewed in the United States on May 11, 2025
Great replacement for the water solenoid valve of my Mud Mixer. Mud Mixer wanted something around $80-90 for a new valve from them.
Doeher Commercial Services
Reviewed in the United States on February 8, 2025
I've had mine for a few years. Still works. It's mounted underneath the rear of an SUV. Not the most cleanest of environments, but this valve is still working.