Your cart is empty.
Your cart is empty. Description:
AC125V Current rerating for different loads
Inductive Load: 4.2A
Lamp Load: 2.2A
Motor Load: 2.4A
Capactive Load: 2.2A
Very Important Notice: Ratings on the switch label are only for Purely Resistive AC load, for other types of loads please refer to the ratings above.DC load Current ratings are much lower than AC load,if you need to use this switch with more than 0.5A DC load,contact us for compatibility at first.
A.C.
Reviewed in the United States on July 4, 2018
Seem to be decent switches. I have mine mounted under the bed caps on my pickup, which is shielded from direct rain, but not necessarily a “dry” location. Time will tell how they hold up. I will update this review if that changes.Hole size: I purchased a unibit (or step bit) from amazon to drill the hole for this switch. If the sizing on the bit is correct, 3/4” was definitely too small, but 7/8” (next size up) was definitely too big. I tested my sizing on a Gatorade bottle cap, and I was able to press the switch into the 3/4” hole. The plastic cap gave some under the pressure and allowed the switch in. This would lead me to believe that if you were mounting this on a dash panel, you may could get by with a 3/4” hole and some elbow grease. I, however was mounting this in metal - no give. I drilled the hole to 3/4”, filed the hole slightly larger, and cut all the plastic mounting tabs off the switch with a razor knife. It fit very very tight. I even had to scrape off the embossed text on the outside of the switch to make it fit. The correct sized hole, I would think, would be around 13/16, but I did not have a bit to test that.
Anon E-mouse
Reviewed in the United States on September 17, 2016
I needed just one, but for the price it was a bargain. Replaced the broken one and this one works beautifully.I will try to find some use for the others.Recommended.
Wayfinder
Reviewed in the United States on March 24, 2016
These are good switches, easy to install. I would like them better if they were more silent... as they have a very audible "clicking" sound when toggled. Other than that, it's a switch, it switches, it works.
t james turner
Reviewed in the United States on August 17, 2015
great for the price. they work as expected and have a quality feel to them. i installed one under the dash console in my car to power the 12v outlet next to it even when the car is off. it fit perfectly in a 0.75in hole i drilled using a speed bit with no wiggling or rotating.
DR Rucker
Reviewed in the United States on May 24, 2015
With all the accessories available today we need switches for them, this is a great switch that looks like it was added when your vehicle was manufactured when installed properly. It is a simple on / off switch. As always make sure you purchase a switch and wiring that meets or exceeds the amp. of the item you are installing.
Brian Buresh
Reviewed in the United States on March 17, 2015
Crap. The connectors broke internally while pushing on my crimp connectors. I broke 4 of the 10 switches this way.
D
Reviewed in the United States on December 3, 2015
I use these little switches to toggle the internal LED strips I put in my PC case. I only ended up using one, but all of them seem to be of the same high quality. They mount easy and work as intended. A few thousand toggles later and there is no sign of failure.
mike
Reviewed in the United States on December 20, 2014
They were not e size that was listed, I have no use for them. They were supposed to fit in a .98 diameter hole, but they will only fit a .75
Recommended Products
