Your cart is empty.
Your cart is empty.Product Description
Specifications: 100% New. 100% factory tested. Built to strict quality control standards. Replaces OEM part number: 22060-30P00 2206030P00 This is Non-OEM product, accessory only!
Brand NEW fitting for the following years and models:
for Nissan 200SX 1995-1998 All Models With 2.0L 4 cyl Engine SR20DE
for Nissan 240SX 1991-1998 All Models With 2.4L 4cyl Engine KA24DE
for Infiniti G20 1991-2002 All Models With 2.0L 4 cyl Engine SR20DE
for Infiniti I30 1991-2002All Models With 3.0L V6 Engine VQ30DE
for Mercury Villager 1993-1998 All Models With 3.0L V6 Engine
Parts Information:
Before purchase this parts, please check the Fit for information or call your local engineer to verify the correct OEM part number. Package include; 1X Knock Sensor
Ivan
Reviewed in the United States on September 17, 2023
Diagnosed it was a faulty sensor on the 4th gen Maxima after checking pretty much every other cause for a p0325 - Engine knock. Turns out the old sensor was cracked, ordered this, swapped it in, and the code went away.
Mary Uchman
Reviewed in the United States on June 8, 2022
The harness is suppose to have one wire connect to the knock sensor, with the other being a ground wire that is wrapped around the signal wire to shield it from electromagenetic interference, so that your knock sensor signal to the ECU is clean. Instead, they just stuck the ground wire next to the signal wire, meaning it is unshielded, which in turn means false signals can be fed to the ECU. This is designed to look legit but in reality its useless. This is a critical component, and this particular brand is garbage that should not be trusted.
Zach Yost
Reviewed in the United States on March 1, 2022
Worked for a vg33e knock sensor relocation. Code is gone and MPG’s returned.
Smo
Reviewed in the United States on December 20, 2021
Worked for my 2004 nissan xterra knock sensor relocations 👍
Best_Salad
Reviewed in the United States on November 22, 2021
This is the perfect piece to replace a broken stock knock sensor on a 99-03 vg33 Frontier or Xterra. You'll have to do a bit of wiring, bit it works fine, is easy and cheap.
MIKE
Reviewed in the United States on November 19, 2021
Perfect for relocation on a nissan 3.3
Gilbert V.
Reviewed in Canada on March 30, 2020
Arrived quickly and works fine
Dave
Reviewed in the United States on March 2, 2019
Fit as advertised on my 02' Nissan Maxima. Replaced the knock sensor and another possibility on my check engine code printout. Long story short the engine light went off after installing. Would reccomend.
Rodolfo Lasparri
Reviewed in the United States on May 29, 2017
This replaces both the sensor and the cable. The oem knock sensor itself had a different connector than this one. Therefore, the old cable was unusable with this new sensor. The included cable connected fine to the main wiring harness.
Recommended Products