Shopping Cart

Your cart is empty.

Your cart is empty.

uxcell Tap and Drill Bit Set, 3pcs M2 x 0.4 Metric Spiral Point Thread Screw Taps & 3pcs 1.6mm Twist Drill Bits, Titanium Coated HSS-6542 Tapping Threading Tool Kit

4.5 (1) Write Review
Free shipping on orders over $29.99

$13.99

$ 6 .99 $6.99

In Stock

1.Size:M4 X 0.7 + 3.3mm


About this item

  • Tap and Drill Bit Set: 3pcs M2 x 0.4 (right hand) thread taps and 3pcs 1.6mm (right hand) drill bit. 6542 (M2) high speed steel screw tap & drill bit set offers high hardness, good toughness, excellent wear and heat resistance for durability, and good cutting performance for clean, precise holes.
  • Wide Applications: Thread tap & drill bit kit can create new threads or re-thread damaged or jammed threads. Spiral point tap is suitable for through-hole threads. Used for cast iron, aluminum, stainless steel, carbon steel, aluminum alloy, bronze and hard plastics. Use with tapping oil to get higher quality threads and more durable taps.
  • Features: Threading Tap: Spiral point and straight flute design, clear threads and no burrs, downward chip removal, fast and precise tapping. Machine tap is used in drill presses, tapping/CNC/milling machines. Not recommended for hand use and electric drill tapping. Twist Drill Bit: Spiral flute chip space design to remove chips quickly and cleanly, Can provide neat and smooth cuts.
  • Finish: Titanium coated drill and tap sets offer enhanced hardness, corrosion and rust resistance, heat resistance, and reduced friction for smoother, faster drilling and tapping. Use an appropriate lubricant to reduce friction and heat build-up.
  • Tips: Drill holes with a twist drill bit first, then tap with a thread tap. Tapping and drilling angle should be 90 degrees vertical and stable. The higher the hardness, the slower the speed. Fast speed with small torque; slow speed with high torque. Tapping depth should not exceed 1.5 times the diameter of tap.


Product Description

    3pcs Spiral Point Taps:

  • Thread size: M2 x 0.4 (right hand); thread length: 11mm / 0.43";; square shank: 2.4mm / 0.09";; total length: 44mm / 1.73";

    3pcs Twist Drill Bits:

  • Drill size: 1.6mm (right hand); cutting edge length: 18mm / 0.71";; shank dia.: 1.6mm / 0.06";; total length: 43mm / 1.69";

    Descriptions:

  1. Thread tap adopts spiral point and straight flute design, with clear threads and no burrs. Screw tap provides downward chip removal, fast and precise tapping, suitable for through-hole threads.
  2. Twist drill bit adopts a spiral flute chip space design to remove chips quickly and cleanly. Cutting edges provide neat and smooth cuts. Use an appropriate lubricant (such as cutting fluid or oil) to reduce friction and heat build-up.
  3. 6542 (M2) high speed steel tap & drill bit set offers high hardness and excellent wear resistance for durability and longevity, and good cutting performance for clean, precise holes. Titanium coated drill and tap sets offer enhanced hardness, corrosion and rust resistance, heat resistance, and reduced friction for smoother, faster drilling and tapping.
  4. Tap and drill bit set is widely for cast iron, aluminum, stainless steel, carbon steel, aluminum alloy, bronze and hard plastics. Use with tapping oil to get higher quality threads and more durable taps. Machine tap is used on drill presses, tapping/CNC/milling machines. Not recommended for hand use and electric drill tapping.

    Tips:

  • Drill holes with a twist drill bit first, then tap with a thread tap. The cutting angle should be 90 degrees vertical and stable. The higher the hardness, the slower the speed. Tapping depth should not exceed 1.5 times the diameter of tap.

Mark Johnson
Reviewed in the United States on April 24, 2025
More Chinese Junk. I’m a machinist and I thought I was going to snap this tap. It’s a 3 flute machine tap which means you can use this tap on slow speed and thread through the part. I knew better not to use a machine to thread, so I hand tapped the hole and I’ve tapped a few hundred of holes and I thought for sure this tap was going to snap. Based on what size hole per a threading chart. The bigger the hole size the less thread you will get.