Your cart is empty.
Your cart is empty.Product Description
4MM TEMPERED GLASS SIDE PANEL
The tempered glass panel have a handle that allows you to swivel it and easy to disassemble, it's held in place with magnet. The transparent glass can show off your internal components and lighting easily.
ADDRESSABLE RGB LIGHTING
Crafted led panel design makes your computer case more stylish and beautiful, and you can control the lighting through the buttons on the I/O panel.
-
COOLING SYSYTEM
Support up to 10pcs 120mm fans and 360mm radiator for efficient cooling and optimal performance.
-
RTX40 FULLY COMPATIBLE
Spacious interior with support for multiple graphics cards, designed for high-performance pc case.
-
STORAGE OPTIONS
Designed with high-end system compatibility, users can easily install up to 5 data storage devices.
Unique LED Design
Crafted led panel design makes your computer case more stylish and beautiful, and you can control the lighting through the buttons on the I/O panel.
High Performance Airflow
This case has a unique mesh design front panel, have multiple ventilation and cooling channels.
Cable Management
Two cord grommet make your cables easier to manage. E-ATX full tower case plenty of space for cable management.
Powerful I/O Panel
The I/O panel on the top of the computer case, type-c ports can offers up to 10G/bps speed.
Bosh5
Reviewed in the United States on March 1, 2025
Great value, a lot of service room. Great air flow
Gary Gray
Reviewed in the United States on April 10, 2025
This is an awesome mid tower case. It has magnetic side panels instead of the screws which made it east to access. All the ports are on top which makes them easy to reach. Has a mesh like material for front case air flow which was one of the things I was looking for. It looks very nice and check off all the boxes I had when I was looking for my case.
Paulo Favato
Reviewed in the United Kingdom on June 20, 2024
The media could not be loaded.
IB
Reviewed in Australia on February 10, 2024
Well equipped, excellent value for money.
CALLxMExACE
Reviewed in the United States on February 20, 2023
I needed a new case for my triple fan radiator. My old case was the same size but only fit a 2 fan radiator at the top. I had a choice between this and a perhaps more appealing to a gamer yet likely cheap materials at a higher price due to it's aesthetics pc case. I decided to go with this, and went from a black case to this white for the ambiance effect it has with RGBs. But what won me over was the extra fans. I figured I wanted beauty and performance over sleek faux futurism.I regret nothing! I installed 2 ARGB fans into the extra slots immediately, and replaced the fans underneath the GPU as well. Btw, YES they make a difference! My 2080ti runs noticeably cooler when gaming. They 2 under the gpu, the 3 front, and the 2 extras inside are set to INTAKE. Holy cow do they suck in air. The exhaust fan in the back is blowing cold air when it's running at full. There is only a little heat that comes out of the top radiator. The inside of this case is getting so much fresh air, it's just ice cold all the time.My old case had 3 fans but only had a narrow slot along the front, and on the bottom to draw in air. This case has the whole front panel to draw in air. Then you got fans along the side helping pull more air, as well as the bottom, and your psu also pulling air.THIS BABY IS A VACUUM... without all the loud noise.Downsides. The extra white fans aren't anything to brag about.Also the bottom has screws for 3 fans... However it's impossible to fit a fan in the middle slot with an ATX motherboard. All the case/usb and other wire essentials plug in and stick out. These bulky fans, and my narrower fans both fail to fit. They should have moved the mounting holes just a few millimeters towards the glass and it'd be perfect. Idk how they could have made such a great case. And then fail to notice such a flaw that is so easy to fix at the manufacturers level. I will eventually have to drill my own holes, but honestly I am not that picky. I just have an ugly gap between my fans. I 3d printed an icicle to hold up my gpu there instead.I am going to give this a 5 star solely because that extra fan doesn't matter, and out of an otherwise perfect case. I can accept one small flaw for it's price. If it was over $150 in price, I would give it a 4. But this is too good of a case for it's price for me to give it anything less than a 5.
Customer
Reviewed in the United Kingdom on December 22, 2023
The argb fan controller works fine but I connect both the fan and argb connectors directly to mobo headers. The two installed lower fans are redundant in my opinion, and I removed these. In fact i would suggest removing them in the first instance to install a full ATX, for full to the mobo headers/ connectors. Although there is USB/C connectors for the case ports, they will not be up to the full speeds required for most users but work as expected. There are all of the screws required for build, provided in a bag, in the case. The case is made of a relatively thin alloy and when screwing in fans, etc. be careful not to overtighten as this could deform the screw holes. The layout is decent and ATX mobo and power supply went in easily enough. There is no PWM direct management for any of the supplied fans, although white 120mm fan replacements do not look out of place. The general space to accommodate various cooling options such as top mounted 360 aio coolers is more than adequate although a decent fan cooler will fit perfectly as well. The airflow through the unit appears fine on temperature testing although I did replace all of the fans for the aforementioned reasons. Power supply is good although easier to remove the disk tray that has a thumbscrew fitting, for easier cable management (replace after cabling if required).Overall, when finished, looks very nice and not out of place for a decent build.
Christy
Reviewed in the United Kingdom on November 17, 2023
Great size case, the colour was just what I was after, only down side is that three of the fans are black and not pick so I will eventually replace those.
michael berring
Reviewed in the United States on January 20, 2023
Have you ever wondered what one of the top one percent performing gaming computers looks like? Well wonder no more!I bought this Vetroo case because I wanted a clean looking and cool running case that I could mount an overhead 360mm AIO water cooler (a Vetroo Lurker) in for my Republic of Gamers Z690 Maximus Hero/ Intel 13700K build. And for the price this one was perfect.With a 5.9 Ghz overclock running full time, idle temps are in the mid 20's and I never see more than low 60's in gaming, and mid 70's in the most intense benchmarking. And this is with a 3090 TI Founders Edition (you know how warm these things can run).Case comes with all the screws, standoffs, and typical hardware that quality cases have included,, along with like 5 case fans, 3 of them RGB. Excellent cable management design, and just a high quality feel to it, everything solid, the tempered glass side panel is hinged for quick access, the hinges are high quality. Plenty of room for power supply, mine is a long Corsair HX 1200, and plenty of room for even the largest GPU's out there. This is a mid tower that doesn't cramp anything.It's nice being a one percenter, lol. I highly recommend this case, the price is hella low for this level of quality... which leaves you with more money to spend on ridiculously overpriced GPU's. :-)
Holly
Reviewed in the United States on August 26, 2022
The media could not be loaded.
DanH
Reviewed in Canada on February 21, 2022
Thin metal. Nice glass. Pink is in.Instructions were thin with zero on the mess of wires and English errors. We bought it because it's pink period.Bitter disappointment after half a day of assembly.
Recommended Products
$39.95
$ 16 .99 $16.99