Your cart is empty.
Your cart is empty.Product Description
Key Features
High Quality
The bender is made using only the highly hardened plate steel. This quality handy ring roller is an essential tool for producing chandeliers, plant holders, and candle holders.
Accurate Adjustment
It has fine adjustment for the top roll and to power this ring roller there is a manual hand crank. Don't judge it by it small size, the bender is a workhorse when the job is right.
13-1 / 2'' Handle
The plate steel manual single pinch roll bender’s handle length is 13-1 / 2''. Power arm is long enough,the operation is with no difficulty and more labor-saving. Therefore, the bender might be you answer.
Heat-Treated & Hardened Surface
The hardened-process roller set surface a prolong service life. Ensuring years of productivity. Metal artists, technical schools, and home shops can find hundreds of uses to keep this well built angle roll in use.
Minimum Ring Diameter 3''
Industrial handy ring roller is designed to make metal rings from 3 inch diameter and larger. The roll bender makes precise bending small rod up to 1/4-inches easy.
Easy To Install
The machine is very small with easy carry and easy operation. Can easily be bench or pedestal mounted, it is designed for roll bending, quick bend application, and variable bend angle.
Specifications
- Material: Hardened Steel
- Ring Size Range: 3" And Larger
- Round Steel Capacity: 1/4"
- Flat Steel Capacity: 1" x 3/16"
- Handle Length: 13-1/2''
- Profuct Size: 8.27 x 8.27 x 13.39 Inch
- Gross Weight: 13.89 lb / 6.3 kg
Package Content
- 1 x Manual Metal Bender
- 1 x Wrench
Handheld Metal Bender
Handy ring bender creates metal rings from 3" diameter and larger. The surfaces of the tool are heat-treated and hardened to provide a long service life. This high-quality ring roller is ideal for making chandeliers, plant holders and candle holders.
- Durable Material
- Accurate Adjustment
- 13-1 / 2'' Long Handle
- Instant Set Up
OYUDOPE
Reviewed in the United States on May 21, 2025
So easy to use. You can fine tune your radius. I recommend this product.
Can do
Reviewed in the United States on May 18, 2025
I use this far more than I expected. It works as expected and I would recommend it. I have used it to make machine part, garden trellises, tie down rings.
Jan
Reviewed in Germany on March 14, 2025
Absolut in Ordnung! Ich verstehe in keinster Weise die negativen Kritiken! Für den Preis in Ordnung. Biegeergebinsse lassen sich sehen!
Gatis
Reviewed in Germany on February 21, 2025
Great tool for the price.Makes rings from 4x30mm steel
Keoki
Reviewed in the United States on April 5, 2025
Bearings are rough sounding and you can feel it hanging up while turning it. This is happening without any load. I just took it out of the frame and spun it. I bought 4 new bearings. For about $123.00 in Hawaii. Frame seems solid.
Rainer K.
Reviewed in Germany on April 19, 2025
Ja ist billig, aber wer für unter 70€ ein Präzisionswerkzeug erwartet ist hier falsch. Für mein Projekt absolut tauglich macht was es soll. Runde Flacheisen produzieren. Für den Hobby Schlosser absolut zu empfehlen. Kleiner Tipp: an den Wellen sind Schmiernippel verbaut da gehört Fett eingepresst die sollten auch genützt werden da rundet sich es erheblich einfacher und die Wellen verschleißen nicht so schnell.
J. W. Helton
Reviewed in the United States on August 18, 2024
Work great the bend 1/4 " rod
kenneth mayer
Reviewed in the United States on May 30, 2024
as advertised
Super.
Reviewed in Germany on June 27, 2023
Ist sehr gut.
Julie Beaumier
Reviewed in Canada on October 10, 2022
I just received this, i am so disapointed, there is no instruction manuel, and there are some things to ajust and no scru to help. Really bad and i cant send it back so i loose my money.
caleb
Reviewed in the United States on January 7, 2022
I bought this for a work test. It arrived with dented drive gears (under the cover) meaning it was hammered together before being shipped. The packaging was poor which caused one of the grease-zurks to be flattened. I needed it to prove a theory for a work project and it worked for that - barely. But I wouldn't wish this thing on my worst Karen of a neighbor.
Robert
Reviewed in the United States on March 22, 2021
I used this roller to make a grill stand and a couple of other items. I rolled 1/4" round rod and 1"x 1/8" flatbar. It works great and is eay to use. I locked it into a vice and used it from there. I wish they made 3/8" rollers for it as I feel the machine would be more than capable of the thicker stock. I have no complaints with this purchase and would recommend for small home and ornamental projects.Robert H.
Hugh Buttrum
Reviewed in the United States on March 10, 2020
I purchased this tool to make brass rings for stained glass lamps. 3" rings at the top.......larger for the bottom. Only tried it once. Tool worked well. I am using brass rod, so it is reasonably soft metal. Easy to set up and use. I purchased a similar tool from Harbor Freight.....turned out to be a chunk of junk. This tool was a bit more expensive, but seems to be much better made. It is going to do the job I want it to do.
Recommended Products
$2,804.53
$ 99 .00 $99.00
$678.99
$ 99 .00 $99.00
$181.33
$ 80 .99 $80.99