Your cart is empty.
Your cart is empty.Product Description
COVER-LE01
Large Laser Engraver Cover Protector
Constructed of high-quality, flame retardant material, this extra large cover is designed to prevent accidental fires from sparks, stray debris, and other potential hazards that could arise during the engraving or laser cutting process.
Zippered Window
Allows you to watch your work as it happens and provides easy access to completed projects
-
Extra Large Laser Engraver Cover
Accommodates extra large engravers and diode laser extension kits for a variety of projects.
-
Fire Retardant Material
Protects against potential fire. The cover withstands temperatures up to 1000 degrees Fahrenheit.
-
Ventilation System
For safe removal of smoke and odors. Features ports for adding an exhaust fan and an exhaust pipe.
-
Light Filtering Viewing Window
Reduces UV and blue light, and we recommend the use of protective goggles for maximum safety.
-
Easy to Store
Flexible material folds easily and occupies minimal space when not in use.
Bsharpie
Reviewed in the United States on February 1, 2025
Nice cover, but doesn’t keep all the smoke contained
darci
Reviewed in the United States on August 8, 2024
Be prepared to have a lot of room. Can't complain esp with the price. It's not real sturdy but it serves it's purpose. No complaints
MMC
Reviewed in the United States on June 2, 2024
It’s a little bit bigger than I need however, my other option was a $500 cover. This one is a fantastic price and it does everything I need it to do. It was easy to put together, but I would say definitely wear gloves. The rods are fiberglass, and I did wind up with a couple of fiberglass splinters in my fingers. It is surprisingly starting for something that was this inexpensive. Most of the laser covers that are much smaller or much more expensive.
Big B in Da Washington hood
Reviewed in the United States on May 7, 2024
Frame is easy to assemble but getting the rods inserted the right amount is tedious at best. No where near the quality of a Creality enclosure but if you have the 400mmx850mm laser or one like that it's your only real choice, which sux that nobody make these.....Price wise it IS a reasonable good buy, The ventilation fan is not adequate so I added a 6" port and use my high volume variable vent system and let the included fan push air into the other end of the cabinet.I must say the material the cabinet is made from is sturdy but pulling it over the frame is a .....er.... well...Tedious....Yeah Tedious....But once you get it on and velcro straps set it does its job well....So in closing --Value - goodFunction - OKEase of assembly - OKStrength of materials - GreatVentilation system - could be far better....So I get is a Single Thumb Up and a Buy recommend....
Joshua Lee Phillips
Reviewed in the United States on February 17, 2024
Package came missing one of the plastic rods. Less than a month of use and one of the tri connectors broke in half and the zipper is detaching from the housing. Very disappointed in this product.
Curstomer
Reviewed in the United States on November 12, 2024
This Laser cover is perfect for all Generic Desktop Lasers. Perfect height, if any other Laser setup is bigger or smaller in length or width, you can modify the support structure by cutting the support tubes to fit the Laser size. Resizing the cover is just as easy, rip out all the seams, cut away any excess part of the cover that is too big. Reassemble the cover with Velcro strips, just glue the Velcro on, no sewing or regluing the seams to fit over the Support Structure. Now you have custom fitted enclosure. Their Customer Support is speedy and fantastic.
Jones Kohary
Reviewed in Canada on November 1, 2024
this a garbage productit does not come with fan, the cover does not fit on the frame. i had to cut the frame rods shorter be able to pull down the cover so its touching the working area..and it doesnt seal any smell, i dont know its because its material or what but the room full with smoke and fume....
Karl Ward
Reviewed in Canada on June 29, 2023
Works perfectly except that it doesn't seal at the bottom and you can get some smoke/fumes escaping
KristySchmisty
Reviewed in the United States on December 30, 2023
We use this over our laser engraver in order to use it inside the house. We did purchase one of the filtered ventilation systems to use with this but it didn’t work so we actually hooked up a legit ventilation system pretty easily. This hood was worth the money and it’s nice to have a big work area so I never have to worry if any part of my laser engraver is getting too close to the hood.
Steve c.
Reviewed in the United States on November 28, 2023
I've used this now for a few months and it does work decent keeping fumes and smoke out as long as you have a proper fan. The biggest downside is the quality of the frame. It's extremely flimsy, hard to put together, and doesn't seem to hold its shape well. Within the last month it's starting to cave in and I had to reinforce it with metal piping for it to hold it shape properly otherwise it would be completely useless. Overall for the price it's not bad but be prepared to make alterations down the road. If you're wanting something to work without having to make alterations to it then this is not the enclosure for you. Used with my ToolD1 pro extension kit.
Greebler
Reviewed in Canada on October 21, 2023
The way the housing actually attaches to the fiberglass rod frame leaves a lot to be improved upon. It attaches with velcro and does not stay down against your tabletop so smoke does come out of it while you are working. It's a great unit, in theory, but maybe if they added a skirting around the outside so better "seal" it.
Recommended Products